Budget: 200 UAH Deadline: 1 day
Здравствуйте. Отрисую ваш логотип в векторный формат. Портфолио в профиле
Budget: 200 UAH Deadline: 1 day
Здравствуйте. Отрисую ваш логотип в векторный формат. Портфолио в профиле
Budget: 300 UAH Deadline: 1 day
Добрый день,
работаю с векторными программами. Большое портфолио работ в профиле, отрисую в нужном формате. Пишите.
Budget: 200 UAH Deadline: 1 day
Сделаю быстро и качественно отрисовку логотипов или принтов с растра в вектор.
Budget: 200 UAH Deadline: 1 day
Здравствуйте, выполню задачу.
Качественно перерисую в векторе, в Adobe illustrator. Сохраню в необходимом формате.
Budget: 200 UAH Deadline: 1 day
Большой опыт отрисовки растра в вектор. Готова обсудить и приступить к работе.
Budget: 200 UAH Deadline: 2 days
Добрый день. С радостью возьмусь за задание. Посмотрите мое портфолио здесь и на Behance. Обращайтесь - буду рада сотруднечеству.
Freelancehunt
Behance
Budget: 200 UAH Deadline: 1 day
Здравствуйте, готова приступить прямо сейчас. Обращайтесь, буду рада сотрудничеству)
Budget: 250 UAH Deadline: 1 day
Здравствуйте, выполню сегодня. Любые правки бесплатные. Выполню качественно и предоставлю в любом формате
Budget: 350 UAH Deadline: 1 day
Здравствуйте, выполню ваше задание -сделать логотип в векторе.
Budget: 200 UAH Deadline: 1 day
Здравствуйте. ! рисую в векторе более 10 лет, могу приступить к заданию сейчас. сделаю все качественно, быстро. жду ответ для сотрудничества! хорошего дня)
Budget: 200 UAH Deadline: 1 day
Здравствуйте
Заинтересовал ваш проект
Буду рад сотрудничеству
Работаю до последних правок
Пишите все обсудим
С уважением Игорь
Budget: 200 UAH Deadline: 1 day
Отрисую быстро и качественно!
Freelancehunt
Budget: 200 UAH Deadline: 1 day
Здравствуйте!
Меня зовут Данил, я графический дизайнер-иллюстратор.
Имею большой опыт отрисовки логотипов и векторизации изображений.
Здесь можно посмотреть видео-презентацию: https://freelancehunt.com/showcase/work/prezentatsiya-vektorizatsiya-zobrazhen/1375521.html
Также есть позитивные отзывы клиентов по этих проектах на данном сайте (смотрите в профиле)
Без проблем могу векторизировать Ваш логотип, включая линии-волны в голове со свечением.
Сделаю в течение нескольких часов (2-4 часа должно хватить).
Обращайтесь, буду рад помочь!
Budget: 200 UAH Deadline: 1 day
Добрий день, зможу зробити ваше завдання за 1 годину
Звертайтеся
Budget: 400 UAH Deadline: 1 day
Здравствуйте! Могу перевести лого в вектор в нужном вам формате.
Budget: 400 UAH Deadline: 1 day
Здравствуйте)
Задание лёгкое, сделаю качественно и быстро
Портфолио Freelancehunt
Budget: 200 UAH Deadline: 1 day
Здравствуйте! Отрисую логотип, готова приступить к работе сразу
Budget: 200 UAH Deadline: 1 day
Добрый вечер
Уже почти готово ,,))
Менять шрифт или нет ?
Жду вас в лс)
Budget: 300 UAH Deadline: 1 day
Здравствуйте!
Заинтересован Вашим проектом.
Буду рад сотрудничеству.
Обращайтесь, обсудим детали.
Портфолио: Freelancehunt
Budget: 200 UAH Deadline: 1 day
Готова выполнить заказ в ближайшее время.
Готовый лого предоставлю в желаемом формате.
С уважением, Анна
Budget: 200 UAH Deadline: 1 day
Приветствую, смогу отрисовать необходимый логотип в векторном формате (AI/SVG/EPS...).
В течение суток будет результат.
Все Ваши пожелания будут учтены.
Budget: 300 UAH Deadline: 1 day
Привет.
Отрисовать могу и сейчас.
Могу и в понедельник.
Опыт работы с 11 года
Пишите
Budget: 200 UAH Deadline: 1 day
Здравствуйте!
С удовольствием возьмусь за данный проект .. Учту все ваши пожелания .
Моё портфолио вы можете посмотреть у меня на странице.
Freelancehunt
Предоставлю несколько варианта на выбор с доработкой понравившегося.
Работу выполняю быстро и качественно, всегда укладываюсь в сроки.
Budget: 200 UAH Deadline: 1 day
Здравствуйте!
СДЕЛАЮ СЕЙЧАС!
Огромный опыт подобной работы)))
Budget: 200 UAH Deadline: 1 day
Добрый вечер.
Отрисую в течении 2-х часов.
Ссылка на портфолио:
Behance
С ув. Анна.
Budget: 300 UAH Deadline: 1 day
Здравствуйте, сделаю.
Учту все пожелания.
Примеры моих работ: Freelancehunt
Budget: 200 UAH Deadline: 1 day
Здравствуйте.
Заинтересовал Ваш проект.
Готов к диалогу.
Выполню в соответствии с ТЗ.
Цена и сроки оговариваются.
Пишите, обсудим детали.
Budget: 200 UAH Deadline: 1 day
Добрий день.
Година роботи і лого буде у вас у всіх потрібних форматах
Звертайтеся і одразу почну працювати
Budget: 200 UAH Deadline: 1 day
Здравствуйте. Заинтересовал ваш проект. Имеется большой опыт в векторной графики и иллюстрации. Готов взяться за ваш проект.
Мое портфолио
Freelancehunt
Behance
Budget: 200 UAH Deadline: 1 day
Здравствуйте, приступлю сейчас к работе
думаю за час-полтора справлюсь
Budget: 200 UAH Deadline: 2 days
Здравствуйте, отрисую лого в векторный формат, пишите в личное сообщение.
Budget: 200 UAH Deadline: 1 day
Здравствуйте! Приступлю сейчас. Пару минут и файл у Вас на руках!
Портфолио:
Freelancehunt
Behance
Google Drive
Буду рада сотрудничать!
Budget: 200 UAH Deadline: 1 day
Здравствуйте. .
Могу сделать сейчас (AI / EPS / PNG / JPG)!
_______________________________________________
Budget: 200 UAH Deadline: 1 day
Здравствуйте!
СДЕЛАЮ СЕЙЧАС!
Огромный опыт подобной работы (много отзывов и примеров)
Профессионально работаю с вектором. Создаю лого и дизайн упаковок/этикеток.
ПРИМЕРЫ В ПОРТФОЛИО!
Аккуратно и качественно перерисую в вектор со схожестью 100% и соблюдением ваших требований.
Budget: 200 UAH Deadline: 1 day
Приветствую!
Готова отрисовать в векторе. Примеры работ в профиле. Пишите, я на связи.
Budget: 200 UAH Deadline: 1 day
Готова выполнить задачу.
Портфолио:https://illustrators.ru/users/edberrot
Congratulations! I am looking for an experienced CAD engineer / CNC modeler with artistic taste to translate an author's graphic sketch into vector drawings for production.The material for the future product will be colored ceramic tiles and natural stone. The elements will be cut on a waterjet cutting machine and decorated on a CNC milling/laser engraving machine.Main project parameters: Base for work: Work is strictly based on the attached author's sketch (panorama of Gdańsk, slightly elevated view). The overall composition, density of development, and rhythm of roofs must be preserved. Dimensions of the finished panel: The final size of the entire picture is 29.5×42 cm (A3 format). Stylistics: It is important to maintain the effect of hand-made. Avoid perfect computer geometry and serious perspective. Lines should be lively, with a slight artistic curvature (imitation of ancient mosaics). Scaling and optimization: Since the overall size of the panel is small, the designer has the right and must simplify small architectural details, change their size, and avoid critically thin areas (the minimum thickness of any physically cut detail, such as a pipe, should be at least 3–4 mm to prevent material from breaking).Technological requirements for construction (Puzzle and Layers):The panel will be assembled from materials of different thicknesses to create a physical 3D volume. Elements need to be divided by layers and labeled in the drawings with the following thicknesses: Background (rear row of houses): Thickness 5 mm. They connect with the middle plan with a minimal optical gap. Bare winter trees at the very top do not need to be cut out – they are designed solely as lines for laser engraving on the background plate of the sky. Middle plan (central row of houses): Thickness 6.5 mm. Foreground (front row of houses): Thickness 8 mm. Drain pipes: Designed as separate parts with a thickness of 10 mm (they should protrude above the entire panel). Insert windows (for the lower and middle rows): Each window is designed as a separate physical part, inserted into the grooves of the walls with minimal gap (optical seamless joint). For the rear row (5 mm), the micro-sized window is made exclusively with a through cut or deep engraving.What should be delivered (two types of programs/layers in DXF/DWG): Program No. 1 (Waterjet contour cutting): All outer contours of the parts (houses, pipes, white windows) taking into account the technological gap (play) between adjacent houses of 1.5 mm (to create an artistic mosaic joint). Program No. 2 (Milling/Surface Engraving): Layer "Deep": Cornices, window sills, door portals, balustrades. Layer "Medium": Large contours of windows, relief of tiles on roofs. Layer "Thin": Mullions of window frames, bricks on chimneys, artistic cracks on walls for an antique effect.For details and clarification of the facades' plasticity (entrance groups, pediments), real photographs of Gdańsk from the internet can be used (views of streets Długa, Mariacka, Piwna from above).Safety and copyright: Before transferring the technical specifications to the contractor, confidentiality conditions (NDA) are agreed upon. All rights to the developed files fully transfer to the Client. Publication in a portfolio or use of files for external purposes is prohibited.Please indicate the cost and timeline for developing the starter set (test 1-2 houses), as well as the estimated cost of the entire A3 panel. Attach examples of your work for CNC/laser The estimated budget for developing such a drawing is $500 USD. Additionally, I would be happy to consider an offer for manufacturing such a product on waterjet and engraving CNC equipment and place a larger order.
Good day. It is necessary to develop a drawing of the product for further cutting on a CNC machine in AutoCAD. Create the drawing in AutoCAD. Prepare the file in a format suitable for CNC cutting (DXF/DWG). All dimensions must correspond to the provided parameters. Be sure to consider the cutting thickness when constructing the drawing. The contours must be closed and free of overlaps, duplicate lines, and unnecessary elements.
for the brand PROSTORA. A modern, simple, and memorable logo is needed that will be associated with space, order, convenience, and reliability. As an example - a sketch in lines, dawn, a room with an open window, a flowing curtain. The logo should look good on signage, websites, business cards, packaging, advertising, and social media. It is preferable to prepare several concepts to choose from and final files in the formats: AI, EPS, SVG, PDF, PNG.
Currently, I have mobilized another mentor for Photoshop with whom I worked and had three sessions. But before finding a new mentor, I want to ask if you also specialize in other programs besides Photoshop, such as Adobe Illustrator, CorelDraw, InDesign, Canva? Please send your portfolio, and I will definitely look at your skills. He was proficient in all the software I listed, and such professionals are unfortunately rare now. With him, I studied cropping in Photoshop, knowledge about ppi and scaling, file formats, watermarks, transformations, file parameters, such as 1920x1080, for example. And now I have stopped at the most interesting topic - Layers, vector, raster, and clipping masks, Smart Objects, compositing. So I want to say right away that I do not need training from scratch; I need to continue the topic where I left off.
I need my logo to be recreated as a true vector, suitable for professional use. The ZIP archive contains the current logo files: light version dark version two SVG files (these are not true vector graphics — they contain embedded raster images). Requirements The logo must be redrawn from scratch as editable vector artwork. Please do not use automatic image tracing. I need clean vector paths that can be edited later.Important Preserve the current design exactly. Keep the slightly imperfect / hand-drawn appearance. Do not "improve" or smooth the logo. The orange "o" must remain unchanged. Preserve the intentionally cropped left edge of the outer circle in the orange "o". This is part of the brand identity.Deliverables True vector SVG (light version) True vector SVG (dark version) PNG (transparent background) – light version PNG (transparent background) – dark versionNotes The logo will be used for websites, applications, print, and marketing materials, so the SVG must consist only of editable vector paths (no embedded raster images).