Budget: 300 UAH Deadline: 3 days
Здравствуйте. делал племяннику на подарок подобное (гараж для машинок). Пишите обсудим. (толщина реза какая?)
Привет! Нужно нарисовать макет для резки изделия на фото. Толщина фанеры 3,8 мм.
Размеры: 130 × 135 × 280
Budget: 300 UAH Deadline: 3 days
Здравствуйте. делал племяннику на подарок подобное (гараж для машинок). Пишите обсудим. (толщина реза какая?)
Budget: 100 UAH Deadline: 1 day
Добрый день!
Могу сделать Вам чертежи в Автокаде, опыт есть, сам занимаюсь плазменной резкой металла. Пишите, обсудим сроки и стоимость.
Budget: 1000 UAH Deadline: 6 days
Доброго вечора.
Зроблю. Уважна до деталей.
Звертайтеся.
[email protected].
Budget: 1500 UAH Deadline: 6 days
Маю досвід по виробам із фанери будиночків.
товщини фанери на ринку: 3,5 мм; 5,0 мм тому товщину 3,8 мм треба робити з 5 мм або зменшувати товщину деталей,
Товщина фанери 4 мм виготовляється закордоном
Budget: 400 UAH Deadline: 1 day
Добрый день
Я очень заинтересована
Для меня самое главное качество
большой опыт работы
*комиссию оплачиваю я
*Я художница-мультипликатор / иллюстратор и теле-художник.
*Я делаю наброски в течение 1 часов.
*Пишите, обсудим детальнее, договоримся.
*Опыт работы дизайнером более 12лет.
*Adobe illuatrator cs6 / Photoshop
*Работу исполняю до указанного срока.
Пример последней работы: Behance
С уважением
Budget: 500 UAH Deadline: 1 day
10 лет опыта в наружной рекламе. порезка фрезером, лазером, плоттером.
на фото не все понятно функционально.
но буду рада сотрудничеству.
Budget: 250 UAH Deadline: 1 day
Здравствуйте! С лёгкостью выполню Ваш проект. Есть опыт в подобной работе!
Обращайтесь в лс для деталей
Budget: 250 UAH Deadline: 1 day
Готов сделать, качественно, оперативно! От 1 дня, от 200,00 грн.
Есть опыт подобных работ. Здесь некоторые работы: Freelancehunt
Пишите, обсудим детали: [email protected], @MirEugene
Budget: 2500 UAH Deadline: 4 days
Добрый день, выполню чертежи и объёмную модель( она понадобится для проверки корректности размеров).
Интересная развивала, я бы купила ребенку)
Мария Яворская
063-142-08-24
Budget: 800 RUB Deadline: 1 day
Здравствуйте, Павел. Выполню проект, есть опыт таких проектов: Google Drive
Google Drive
Budget: 800 UAH Deadline: 1 day
Выполню Ваш заказ. Имею опыт изготовления изделий из акрила и фанеры методом лазерной резки больше 10 лет. Сделаю 3D модель в SolidWorks, чертежи, dxf файлы для лазерной резки, схему для сборки, эскизы. При необходимости могу сделать оптимальный раскрой на один комплект.
Budget: 500 UAH Deadline: 1 day
Здравствуйте! Я занимаюсь графическим дизайном. Готов взяться за ваш проект. Выполню быстро и качественно, уделяю внимание деталям! Выполняю работу в Adobe Illustrator, Adobe Photoshop, Adobe InDesign, Adobe Animate. Переведу в CorelDRAW.
Портфолио - https://sites.google.com/view/digitaldv/
Budget: 1205 RUB Deadline: 2 days
Здравствуйте.
Сделаю 3 d модель и предоставлю фаил в CorelDRAW
Budget: 400 UAH Deadline: 1 day
Здравствуйте, Павел.
Готов взяться за Ваш проект. Пишите, все обсудим:)
Budget: 700 UAH Deadline: 2 days
Готов обсудить и сделать.
Примеры работ здесь: https://vk.com/id302554511
Budget: 300 UAH Deadline: 1 day
Здравствуйте!
Готов выполнить задание. Есть большой опыт в создании векторных и растровых изображений. Однажды уже приходилось делать макеты для резки. Сделаю все в лучшем виде с учетом всех пожеланий.
Пишите, буду рад сотрудничеству.
Budget: 500 UAH Deadline: 1 day
Добрый день!
Готов к сотрудничеству. Моделирую в 3D Max, SolidWorks, визуализация в VRay.
Портфолио по ссылке: Behance
https://yellowimages.com/klimen1982gmail-com/
E-mail: [email protected]
Budget: 500 UAH Deadline: 2 days
Здравствуйте, Павел
Готов выполнить вектор для резки набора из фанеры. При необходимости, выполненные образцы отправлю в личку.
С уважением, Виктор
Budget: 500 UAH Deadline: 1 day
Сделаю.
От Вас только размеры (хотя бы примерно).
Качество исполнения гарантирую.
Обращайтесь.
Budget: 400 UAH Deadline: 1 day
Сделаю быстро качественно за адекватную цену.
- Работаю в CorelDRAW x3 ,Illustrator.
- Имею большой опыт в работе с логотипами и проектами разного плана векторной графикой.
- Буду рад принять заказ.
Портфолио: Freelancehunt
Budget: 500 UAH Deadline: 1 day
Здравствуйте Павел! С удовольствием выполню этот проект. Прошу уточнить все требования к макету для возможности согласования стоимости и сроков.
Budget: 500 UAH Deadline: 2 days
Готов выполнить ваш заказ, имею опыт создания файлов как для ЧПУ фрезера,
так и под лазерную резку (можно посмотреть в портфолио). Так же интересно долгосрочное постоянное сотрудничество.
Budget: 500 UAH Deadline: 2 days
Здравствуйте Павел. Готов помочь вам в макета под фрезеровку. Готовый макет сброшу в dxf, ai, eps, cdr + pdf для удобства. Есть огромный опыт в подготовке макетов под фрезеровку и плотерную подрезку.
я так понимаю и коробочку тоже надо чертить. тогда в фото или описании хорошо бы добавить раложенную эту коробочку. потому что по этим фото не все отверстия понятны для чего.
Думаю 100%, у заказчика нет самого набора.
И есть желание сделать подобное.)
но технологически не совсем понятная коробочка.
хотя нарисовать - не проблема :)
Главное, чтобы по этим рисункам, готовые элементы можно было собрать.
Для этого необходимо делать, например, в программе SolidWorks. И проверять)
Dear designers and creators of functional wooden furniture, I present to you a mini-project. 1. General Information Subject: Development of detailed drawings for the manufacture of two single beds by custom order with bedside tables. Number of products to be manufactured: 2 (two). 2. References Use the provided photographs (files 1.png, 2.jpeg, 3.jpeg) as visual and conceptual basis. Design: minimalism, massive elements, clean lines, emphasis on the natural texture of wood. 3. Technical Specifications and Dimensions 3.1. Bed and Mattress: - Mattress size: 1000 x 2000 mm. - Mattress height: 160 mm. - Sleeping place height: Designed considering the height of the bedside tables (500 mm). - Base for the mattress: Orthopedic frame with beech slats. The frame construction (rails) should include reliable internal supports for the installation of the slatted base. 3.2. Bedside Tables (freestanding): - Dimensions: Width — 460 mm, Depth — 500 mm, Height — 500 mm (proportional to the height of the bed). - Configuration: Two rows of pull-out drawers. The tables are independent elements and are placed in front of the side panels of the headboard. 3.3. Headboard: - Height: 1400 mm. - Total width: Calculated (Width of the bed + 2 widths of the tables at 460 mm + technological gaps). Approximately: ~1920-1950 mm. - Installation: The headboard is attached exclusively to the bed frame and is an integral part of it. Mounting to the wall is strictly prohibited. - Structure (4 components): - Upper part: Wide horizontal panel across the entire width of the structure. - Two side parts: Vertical panels located behind the bedside tables. Central lower part: A panel located directly behind the mattress and adjacent to the bed frame. 4. Materials and Hardware 4.1. Materials: 100% solid wood. All parts are made from solid wood: visible bodies, facades, headboards, as well as internal boxes of all drawers. Replacements (MDF, particle board) are not used. Finish: Matte transparent varnish. 4.2. Hardware: - For all drawers of the bed and tables, use hidden mounting guides (e.g., Blum Movento, Hettich AvanTech/Actro or analogs). - Opening mechanism: "Push-to-open". No external face hardware (handles) is provided. - Fastening hardware must be hidden where possible and ensure maximum rigidity of the massive structure. 5. Structural Requirements (Assembly/Disassembly) - The product must be designed based on the principle of a modular constructor. - Fasteners (bed connectors, mini-fixes, confirmats, etc.) must ensure easy and intuitive assembly on-site, as well as the possibility of repeated disassembly without loss of rigidity and damage to the wood. 6. Requirements for the Designer/Constructor's Work Result The contractor must provide: - 3D model / Visualization of the developed structure - Complete set of working drawings (front, top, side views with all dimensions). - Assembly diagram of the nodes (especially the connection of the 4 parts of the headboard with the bed). - Specification (detailing) of materials indicating the dimensions of each solid wood part. - Specification of hardware (exact list and quantity of guides and fastening elements). - I also expect questions from you regarding the project regarding the possibility of making up to 4 revisions from my side. Additionally, as a test task, which will also be paid, it will be necessary to design a hexagon shelf. Shelf size Width 350 millimeters Height 400 millimeters. Depth — 130 mm Material: wood (Ash and Beech) Thank you for considering this Mini Project Offer.
The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.
There is a ready-made plate (the base of the keychain) and a logo that needs to be applied to this plate so that the letters are raised and clear when printed with a 0.4 mm nozzle.
We are looking for a specialist who professionally engages in optimizing high-polygon car models for GTA V. Our main task is to obtain models that combine maximum performance with the highest possible visual quality. If you can find this balance, we would be happy to establish a long-term collaboration. Main Responsibilities Performing retopology of car models. Optimizing the polygon mesh to an optimal number of triangles without noticeable loss of quality. Re-baking textures (Normal, AO, Curvature, and others) after optimization. Preserving proportions, geometry, and all key details of the car. Optimizing textures, materials, and model structure according to the requirements of GTA V. Creating LOD levels. Preparing collisions. Preparing the model fully ready for integration into GTA V. Our Expectations Practical experience in retopology and optimization of 3D car models. Proficient use of Blender or other professional 3D packages. Experience with baking PBR textures. Understanding the principles of model optimization for real-time games. Experience preparing vehicles specifically for GTA V will be a significant advantage. Understanding the specifics of LOD, collisions, materials, textures, and the limitations of the GTA V engine. Ability to work quickly without sacrificing quality. What We Provide Source car models. Constant workflow. Long-term collaboration. Competitive payment depending on the complexity of the model and quality of execution. Important For us, quality and speed are equally important. The final result must be maximally optimized for GTA V, have clean topology, optimized textures, correctly configured materials, while preserving the appearance of both the exterior and interior of the car as much as possible. We are looking for a specialist who can regularly prepare high-quality models without the need for additional revisions after submission. Please propose a cost per car and indicate the time frame in which you can complete the work.
Welcome! The company Adaptis needs to update graphic materials for A+ content on our website and on Amazon. We already have a fully prepared design for A+ content (cards, banners, infographics), but they depict a different shape of our product. We have changed the product design and now have its new 3D model. The main task is to create realistic renders of the new product shape and carefully "fit" them into the existing banners instead of the old shape. And immediately your cases