Budget: 1500 UAH Deadline: 2 days
Hello to you! I am an architect-designer, I will do it quickly and quality!
Budget: 1305 UAH Deadline: 2 days
I propose to form a plant plan in a collage style, which will make each area on a plan understandable even without explanation - with the help of textures, green and other staphages - by machines and asphalt textures we will indicate part of the passage, trees and grass recreation zone and so on.Colage is possible both colorful, and in CB - how do you like it more?I will also add the necessary labels, such as sizes, rooms and zones, height labels (if necessary).I did a similar layout for the reconstruction of the factory in Belgium, but since this project with a non-reveal agreement, I can show you my other work.Please pay attention to the planning of my project.
Behance
From the analogues for your project I can offer the following options:
HTTPS://i.pinimg.com/564x/b9/7d/60/b97d605c95058519f3e92433101d71fb.jpg (textures on the surroundings, staphage, buildings just a shade with shadows, the whole picture colored)
HTTPS://i.pinimg.com/564x/ab/34/28/ab342878ccf27de3e369d29d3bfebe7d.jpg (textures on the surrounding, buildings just a coat, the factory area colored, and beyond it cb)
https://i.pinimg.com/564x/03/41/78/0341783e9d044a774a31d47bf8444360.jpg (simple texture, common plans with walls, the environment outside the factory is not shown)
I will need a DVD file to work.A few questions to you:
1 .Which of the analogues suits you most?2ndPlease tell me more in detail about the area, which areas mean all the numbers?
- Projects 7
- Rating -
- Rating 435
Budget: 2000 UAH Deadline: 2 days
Hello, I'll make a visual on any references from you6 price depends on size and detail
Budget: 3800 UAH Deadline: 2 days
Good day .
I do it for $100. Duration approximately 2 days.
Google Drive
Budget: 700 UAH Deadline: 1 day
Good day . I love illustrations. I do it quickly and efficiently. and winding)
Portfolio https://t.me/+52FI287Ji9VkMGYy
Budget: 1000 UAH Deadline: 3 days
Good day .
I retire in 3D with visualization in the right direction.
Examples are:
Google Drive
Budget: 1250 UAH Deadline: 4 days
Good day . I work in the Illustrator program, I possess it at a high level. In my portfolio are presented only characters, but given that I have technical education, I have worked a lot and often with the drawings of ATP and details, so make infographics on your example I can in the best way. While the price is preliminary and to set the direct price for work, some discussion of the details of the project is required.
Budget: 1500 UAH Deadline: 4 days
Good day .
We offer our services to implement your project!
Budget: 1234 UAH Deadline: 2 days
Good day !
Ready to discuss your project and implement it. (What should be displayed in the illustration?)
There are no examples of such work, but the project is interesting.
Examples of works:
Google Drive
Google Drive
Go to turn.
The cost and duration of the work will be clarified after all of the requirements.
with respect,
by Sergey.
Budget: 700 UAH Deadline: 2 days
Hello to you! You have an interesting project that you want to create in life. Write me, I have a few questions and suggestions.I am ready to work with you.
Some of my work can be viewed here- Behance Let’s discuss details.
I start in different styles.
I give you all the files I need.
I will do it in the best.
The work and work will be discussed before the start.
Proposals concealed
Proposals are currently absent
-
Marina Bak-Kichka 6 January 2023Доброе утро. Есть вопрос - предоставьте спецификацию, пожалуйста. От этого зависит цена - что именно размещено под номерами на плане. Спасибо. Такую работу выполняла, чуть позже пришлю пример.
Current freelance projects in the category Drawings & Diagrams
Assembly Principle: Completely weld-free, exclusively using bolted connections (“NO-WELD BOLTED CONSTRUCTION”). The structure is modular (Flat-Pack) to minimize logistics costs and facilitate self-assembly by the customer. 1. TECHNICAL REQUIREMENTS AND AESTHETICS • Requirement for the developer: The product must be designed to have a flawless, presentable commercial appearance for export to the EU market. • Intuitive assembly: The design should allow for the simplest assembly possible, enabling the customer to assemble the box independently without special tools. • Frame material: Stainless steel AISI 304 (matte), sheet thickness — 1 mm. • Construction: Corner system with flanging for rigidity and safety. Stacking (nesting) during transportation. • Wall filling (sandwich): PIR board (30 mm) with a tolerance of ±4 mm. The groove design should compensate for this tolerance, eliminating gaps. • Wall cladding: PIR board is covered on both sides with smooth stainless steel sheets of 0.5–0.6 mm. • Assembly: Strictly with bolts (stainless steel A2/A4). Minimum number of bolted connections inside the working area for ease of cleaning and disinfection. • Feet: Height 30 mm, integrated into the lower binding contour. 2. DOOR CONSTRUCTION AND LOCKING • Sealing: Rubber seal around the entire perimeter of the reveal and a stop (false bar) for 100% elimination of gaps. • Hinges: Seat design that eliminates play (bolts serve only the function of clamping). • Locking: Mechanical latch lock “finger in hole”. • Door configuration: Doors spanning the full width and height of the facade, divided horizontally into two independent sections: upper and lower. ◦ Lower section: blind. ◦ Upper section: has a viewing window. ◦ Operating principle: The lower section opens first and, when closing, tightly presses against the upper section. • Viewing window (Product No. 1): Located in the upper section. Double-sided, with an air layer. Clamping strips for securing any transparent material (glass, plastic, or film) with a thickness of from 2 to 5 mm. 3. VENTILATION SYSTEMS (Identical for both products) • Protection: Mesh (stainless steel, wire 0.5 mm, cell 0.8 mm). Installation — through clamping frames with bolts (without drilling the mesh). • Upper exhaust (120 cooler): Cutout 200x200 mm in the roof, cooler installation through a flange with M4 thread. Under the cooler (above the mesh) — adjustable damper (shutter). • Lower intake: Two openings (left and right), raised 100 mm from the floor. Area of each — 300 cm². Both intakes have adjustable dampers (shutters). 4. PRODUCT SPECIFICATION • PRODUCT No. 1 (Vertical 600x600x1200 mm): Two-section doors (lower blind, upper with window). Equipment: lamp mounts, cable pass-throughs, mounts for IR film (on the wall), curtains for mesh suspension, strip for the shield from the end. • PRODUCT No. 2 (Horizontal cabinet 600x600x600 mm): Single-section doors without glazing. Equipment: lamp mounts, cable pass-throughs, mounts for IR film (on the wall), stainless steel guides for shelves, strip for the shield from the end. 5. WHAT IS REQUIRED TO BE DELIVERED: 1. 3D assembly: STEP / SolidWorks formats, with the ability to freely disassemble the model. 2. Drawings: Detailed drawings of assembly nodes. 3. Unfoldings: DXF format (considering the K-factor of bending). 4. Specification table (BOM): All stainless steel fasteners.
A gerber file is required to order a board based on the description; there is no schematic, part of the schematic (the PWM) will be drawn by hand. The set is very simple: a power stabilizer based on the ATmega 328, a 1602 display, and three buttons with a couple of small connectors.
Need a teacher with experience in online teaching who will demonstrate the use of AutoCAD from scratch to a group of students online. (Preferably - experience in the architectural field) Topics: Introduction to AutoCAD Basic drawing tools Editing drawings Layers and object properties Hatching and formatting Text and tables Dimensions Blocks and attributes External references and drawing organization Preparing drawings for printing Practical work Final project Conditions: 700 UAH/hour. Online, on weekdays, evening time from 18:00
Greetings. Development of a premium 3D model of a wooden memorial product for CNC production Project description A custom design of a premium wooden memorial product needs to be developed for further manufacturing on a 5-axis CNC. The project should not resemble classic memorial products. The main idea is a modern minimalist design. The product should look like a solid sculpture without wide frames and unnecessary decorative elements. Tasks Create a high-quality 3D model. Ensure the possibility of production on a 5-axis CNC. Design the body and lid. Consider a hidden seam line. Include hidden hinges and locks. Create an internal cavity according to standard internal dimensions. Execute the model with correct slopes and radii for wood processing. Style Minimalism. Premium design. Maximally smooth shapes. No sharp corners. No wide frames. Solid streamlined surface. Material Main material: oak; ash; walnut. Wall thickness should be suitable for manufacturing from solid or laminated wood. Result The following should be provided: STEP; STL; IGES (if possible); source CAD file; high-quality renders; drawings with main dimensions. Desired skills of the performer SolidWorks; Fusion 360; Rhino; Autodesk Inventor; Fusion CAM; experience in modeling wooden products; understanding of model preparation for CNC. Important A performer with experience in creating premium-class products and industrial design is needed. Ready to sign an NDA (non-disclosure agreement) before providing detailed technical specifications and references. Having a portfolio with complex organic or industrial forms will be an advantage.
Good day. It is necessary to develop a drawing of the product for further cutting on a CNC machine in AutoCAD. Create the drawing in AutoCAD. Prepare the file in a format suitable for CNC cutting (DXF/DWG). All dimensions must correspond to the provided parameters. Be sure to consider the cutting thickness when constructing the drawing. The contours must be closed and free of overlaps, duplicate lines, and unnecessary elements.