Budget: 3000 UAH Deadline: 7 days
Hello, I will make a few planning options. The price for the entire project (escins, work drawings) is $20/m2. Portfolio Google Drive
Budget: 500 UAH Deadline: 3 days
Good day ! I have a lot of experience in this area! I do the work quality and in time. I will be glad to help you!
My work can be viewed at: https://www.instagram.com/ztotskii?r=nametag
Viber\telegram :+38 063 350 4397 call at any time!
Email: [email protected]
Budget: 1000 UAH Deadline: 1 day
Good day ! Ready to implement a project for you. Please contact us to discuss details.
Budget: 400 UAH Deadline: 2 days
Good day !
I will perform all possible planning options and the necessary drawings for the builders.
Go to turn. pleased to collaborate!
Budget: 4000 UAH Deadline: 4 days
Hello to you!
Ready to implement your project.
Experience in design and design for over 10 years.
There is experience in performing only the technical part of the design-project, for the start of the repair.
The basic project includes:
The size of the object and the drawing of the object in 3D.
3D variants of furniture layout, sanitary and replanning.
-Charts on harmonised replanning (demonstration, installation, furniture and sanitary layout, floor plan)
The exact cost and deadlines are agreed after the specification of the task. Payment gradual, 50 UAH/mq.
If you need not just pictures, but also a repair assistant.
Write or call - we will discuss details!
With respect, Sergey
mob(viber): +380963943136
mob: +380502476836
Email: [email protected]
Website: www.gsv-designer.com
Budget: 1000 UAH Deadline: 3 days
Hello to Dmitry.
Ready to cooperate with you.
I am an architect and designer for about 15 years.
I do a few options with the layout of furniture in 3D.
I will do the work quality and in time.
Look at my work in profile.
With respect to Elena
Budget: 2000 UAH Deadline: 5 days
Good day .
Prepared to perform functional and practical re-planning.
Examples of works:
The latest and latest is https://www.instagram.com/antoshchuk.design/
and Freelancehunt
with respect,
by Yevgeny Antushchuk.
+38066 388 95 22
+38098 848 04 56
by [email protected]
Budget: 100 UAH Deadline: 14 days
Hello, you are ready to implement your project. I do everything beautiful and quality. We can discuss the details of the project.
Budget: 4000 UAH Deadline: 4 days
Hi Dmitry, ready to develop 3-5 options of apartment planning with furniture layout.
Skype Basena13, Viber 050-915-17-30
The sample of submission:
Freelancehunt
Budget: 100 UAH Deadline: 3 days
Hello to you! I offer my services. Ready to discuss details. Cost and deadlines after the discussion.
Budget: 4100 UAH Deadline: 5 days
Good day . Ready to implement your project. My portfolio : Behance
Link to the project: Google Drive
Link to the technical project: Google Drive
Budget: 100 UAH Deadline: 3 days
Good day .
I’m preparing for you a planning solution in several options.
Cost of 40g/m2
Example: Google Drive
Examples of my work in the profile and link: Behance
Example of the project is that part: Google Drive
Example of the project - visualization: Google Drive
Cost of the full design of the project from 300g/m2
If you have any questions, please write in personal messages, I will answer and give you more detailed information about the development of the project.
Proposals concealed
Proposals are currently absent
Proposals concealed
-
Oleg Shabunin 23 July 2019В состав рабочего проекта дизайна квартиры входит:
> комплекса входит комплект таких чертежей:
> - Обмерочный план помещения.
> - План демонтажа перегородок. (Указываются все сносимые стены и
> перегородки)*.
> - План монтажа перегородок. (Указываются все вновь возводимые стены и
> перегородки)*.
> - План помещения после перепланировки с раз мерами*.
> - Экспликация помещений с расстановкой мебели (на основе
> утвержденного плана после реконструкции указываются места расположения
> мебели).
> - План размещения санитарно-технического оборудования .
> - План потолка с указанием типа используемого материала.
> - План размещения осветительных приборов (указываются осветительные
> приборы с точными привязками и перечнем типов используемых
> светильников, также указываются настенные светильники).
> - План выключателей с указанием включения групп светильников.
> (особенно важно для помещений с многоуровневым освещением).
> - План размещения электрических розеток, выводов слаботочных сетей,
> размещения электрооборудования.
> - План пола с указанием: типа напольного покрытия, рисунка и размеров.
> - Развертка стен.
> - Развертка стен в с/у и душевых с раскладкой плитки, указанием
> размеров и площадей.
> - Спецификация дверей с указанием размеров дверных проемов.
> - Ведомость отделки помещений.
> - Подбор мебели, аксессуаров, светильников, сантехники, отделочных
> материалов.
> - Визуализация в программах 3d Studio Max.
С уважением, архитектор Шабунин Олег Павлович
https://shabunindesign.com
+38-(097)-160-99-82 [email protected]
Viber (096) 131 13 47
Current freelance projects in the category 3D Modeling
Design a case model for an electronic device for 3D printing, and also for future use with a syringe press. The case must have openings for USB-A, USB-C, BH-8 connector, display, a hole for an internal reset button, openings for buttons and button pushers. The board can be completely redesigned if your design is more ergonomic. An approximate appearance is shown in the photo.
I wish to create a 3D visualization of the room's interior to understand the comprehensive layout of the furniture and the overall picture after the renovation. I already have all the photos of the furniture elements; they need to be arranged in the space to give the room the appearance it should have after the renovation.
Modification of the STL model of the impeller for 3D printing (PETG)There is a ready STL model of a two-blade propeller for a jet ski SUP board. The geometry of the hub and the seat for the shaft are completely satisfactory, they do not need to be changed.What needs to be done:“Cut off” the old 2 blades from the existing hub.Design 3 new blades from scratch.The radial gap between the edge of the blades and the inner wall of the housing (nozzle) must be strictly 1.5 mm.Technical data for calculating angles and pitch:Motor: Brushless, KV\ 200 (diameter about 50 mm).Power supply: 42 V battery (BMS 60 A).Controller: VESC 75200 V2.The model must be optimized for FDM printing with PETG plastic (strong fillets at the junctions of the blades to the hub).
Good day. The essence of this project is to create product photos for the website. I will provide the approximate style and designs of the houses. I will provide samples of how it should look. Please send samples of your work. And we will collaborate.
3D model of an armrest and foot support (outlined in the photo) is needed for CNC machining armrest 6x6x50 cm Maximum width of the lower part is approximately 11 cm Height 30 cm