Budget: 1500 UAH Deadline: 5 days
Hello to you. I can draw the page design according to these images and give you pages in the PSD format, where everything will be in separate layers. I have been working in design for more than 4 years.
All my work is done from zero.
My portfolio is: Freelancehunt
My email address: [email protected]
Budget: 10000 RUB Deadline: 5 days
I have a unique design for you. The result of the work will be a psd-macket broken by layers. (Without a spoon)
My portfolio: Behance
My Skype: Shadowinchaos
Budget: 1000 UAH Deadline: 7 days
Hi, Julia
I’m going to make it in the PSD format, I’m going to put it all down!)
Ready to start right now!
Budget: 1500 UAH Deadline: 5 days
Good Morning .
Ready to do.
Write in a face, Skype or Wiber.
by: karmakillersl
Viber: +38 050 928 69 18
HTTPS://freelancehunt.com/my/portfolio
HTTP://fesenko.com.ua
Budget: 600 UAH Deadline: 2 days
+
Budget: 500 UAH Deadline: 5 days
Ready to take this job.
Write to me on Skype volodya6670
The main argument is the price
Budget: 1000 UAH Deadline: 1 day
Hello to you!
I will be happy to invest my skills and ideas in the design of your project. For more than three years I have been working on quality and performance. I can start right now. If you are interested in cooperation, I'm waiting for a reply from you, my Skype - bodijkeee24. Thank you for attention!
Portfolio : Freelancehunt
Budget: 1000 UAH Deadline: 2 days
Good night, price and time for the project.
HTTPS://freelancehunt.com/my/portfolio
I will be happy to cooperate.
Budget: 600 UAH Deadline: 3 days
Ready to draw
Budget: 1000 RUB Deadline: 4 days
I will do it in a couple of days, 1000 r. and a positive feedback.
Budget: 1000 UAH Deadline: 2 days
+++
Budget: 750 UAH Deadline: 2 days
I am pleased to fulfill.
Budget: 2200 UAH Deadline: 3 days
Welcome to
ready to do this work under the key, with installation on your hosting and domain,
The version of the site,
Budget: 2500 RUB Deadline: 5 days
Julia, you are well.
I have written a personal message to you, here I leave my bet with the price and deadlines.
- Projects 23
- Rating -
- Rating 949
Budget: 1000 UAH Deadline: 3 days
Welcome to)
My portfolio Behance or more extensive portfolio at
Google Drive
I will be happy to cooperate with you)
Skype by [email protected]
Budget: 1000 UAH Deadline: 2 days
Hello to Julia!
If today we discuss all the details, tomorrow I will give you a PSD format pattern made on a network with carefully grouped layers. In short, ready for the layout. Go to turn!
My portfolio is: Freelancehunt
by Skype: llaschell
Email: [email protected]
VK: https://vk.com/copy_write
Budget: 3000 RUB Deadline: 2 days
Hello to you!
I do
- Projects -
- Rating -
- Rating 360
Budget: 2500 UAH Deadline: 5 days
Hello to
Ready to accept your order.
I do it quickly and quality.
- Projects 3
- Rating -
- Rating 307
Budget: 3000 RUB Deadline: 1 day
Good Morning Julia
Ready to do
Is there a font that has been used?
The Desktop?
Budget: 1500 UAH Deadline: 2 days
I paint without trouble. At the exit you will get ready patches for the wrap, please contact!
Budget: 2000 RUB Deadline: 2 days
The period is orientative, as it may take time to search for pictures and phrases.
Budget: 2300 UAH Deadline: 2 days
Go to turn.
Budget: 1500 RUB Deadline: 2 days
Joey, please contact me :)
Budget: 200 UAH Deadline: 1 day
Hello to you!
I have read your description and I am ready to work with you!
Can we call on Skype today or tomorrow?
We will discuss details in the personal message.
The portfolio is in the profile, or at Behance Behance
Be sure that you won’t be indifferent. I will help you to find a balanced solution for the task.
HTTPS://vk.com/lyubimovbro
+380953941392
Skype for AxeFox2002
Thank you in advance!
Budget: 1000 UAH Deadline: 2 days
Hi Julia)
As I understood, you just need to negate the pages in the photoshop, so that you can then transfer it to the shell. I will be happy to do this for you! Go to turn.
Budget: 1000 UAH Deadline: 3 days
Good day !
Duration of production: 1-3 days
• • • • • •
I have been working in the design industry since 2009.
University of Kharkiv Academy of Design and Arts
The contacts:
0664422204
by [email protected]
Budget: 600 UAH Deadline: 1 day
Good day, I'm doing it in the best way, write
The price will be agreed)
Budget: 1000 UAH Deadline: 1 day
Skype: sjbrume
Proposals concealed
Proposals are currently absent
-
Ivan Nikolaychuk 15 February 2017готов зделать ету работу под ключь , с установкой на ваш хостинг и домен,
резиновая версия сайта,
Current freelance projects in the category Web Programming
The website is already launched and operational. The main task is to understand the current project structure, check the quality of implementation, fix identified technical issues, and assist with further changes.Main Stack Next.js 15 React 19 TypeScript Tailwind CSS Zod Redux Toolkit The project may also use: Prisma JWT authorization Stripe Mailgun Google APIs Vercel or Netlify FunctionsMain Tasks conduct an audit of the existing project; evaluate the structure and quality of the code; fix bugs and enhance current functionality; improve server-side rendering and page load speed; check the correctness of the website display on mobile devices; work with forms, the administrative part, and external integrations; make technical SEO changes; maintain and gradually improve the existing website.What is Important to Us good experience with Next.js, React, and TypeScript; ability to understand someone else's code; understanding of SSR and the features of Next.js App Router; attention to performance and quality of implementation; ability to explain identified problems and propose clear solutions; independence and careful work with the existing website. At the first stage, it is necessary to familiarize yourself with the project, conduct a technical audit, and propose a list of priority changes. After that, ongoing work on the further development of the website is possible.
We are looking for an experienced Embedded developer to create energy-efficient firmware for a wearable device (form factor: chest strap) for monitoring psychophysiological state. The circuit design is complete, and development will be based on a development kit with subsequent transfer to a custom board.Stack and hardware base:MCU: Nordic Semiconductor nRF52840 or nRF5340.Development environment: nRF Connect SDK / Zephyr RTOS (strictly C/C++).Peripherals:Optical pulse sensor (PPG) — operates via I2C.6-axis inertial sensor (IMU accelerometer + gyroscope) — operates via SPI.Haptic motor driver (LRA 1030) — controlled via PWM.External SPI Flash memory for cyclic logging.Work scope by stagesStage 1: Bring-up, peripheral drivers, and BLE telemetryGoal: Bring the hardware to life, set up stable data collection, and transmit it to a smartphone/PC.Configure I2C and SPI buses using DMA (Direct Memory Access) to offload the processor.Write/integrate drivers for PPG and IMU (configure polling frequency, sensor FIFO buffers).Deploy a custom BLE profile (GATT service) for real-time transmission of raw data from sensors.Basic initialization of PWM for controlling the haptic LRA motor (launch test vibration patterns).Stage 2: Algorithmic layer (DSP and multi-level feedback logic)Goal: Implement mathematical signal processing directly on the chip (Edge Computing) and device reaction logic.Implement algorithms for filtering motion artifacts: clean the PPG signal using accelerometer data (IMU).Extract R-R intervals (HRV) from the cleaned PPG signal.Implement 4-level system stability logic:Drift Level: Track gradual changes in HRV and breathing.Prediction Level: Calculate a mathematical trend for deterioration.Micro-correction Level: Generate barely noticeable haptic patterns on the LRA motor when a target data pattern is detected.Hardware Reset Level: Implement safety logic (high-intensity haptic pulse at critical metrics).Stage 3: Energy saving, logging, and fault toleranceGoal: Prepare the device for autonomous operation from a miniature battery and ensure "24/7" stability.Deep optimization of energy consumption. Put the MCU into sleep mode (System ON/OFF) between measurement cycles. The processor should wake up only on interrupts from sensor FIFO buffers or a timer.Write a fault-tolerant file system in external SPI Flash (e.g., LittleFS) for autonomous cyclic log saving.Configure a hardware watchdog timer to prevent firmware hangs.Requirements for the performer:Experience in commercial development for Nordic chips (nRF52/nRF53) of at least 3 years.Proficient in Zephyr RTOS and debugging tools (Segger Embedded Studio / VS Code, J-Link).Understanding of digital signal filtering principles (DSP) and low-power design.Having your own debugging kit (nRF52840-DK or similar) for starting work is welcome.Work format:Milestone payments with results documented on GitHub. Please indicate your hourly rate or approximate cost and timeline estimates for each of the three stages.
Need a Wix specialist for website layout based on Figma design. There is a ready website design in Figma. It needs to be implemented in Wix with high quality, closely following the layout. Requirements: transfer the design from Figma to Wix; adapt all pages; set up desktop and mobile versions; ensure correct display on different devices. Preference will be given to freelancers with experience working with Wix. Please send your portfolio with completed projects.
General information It is necessary to develop a simple minimalist web system, the main purpose of which is to maintain a client database, create appointments for visits, and automate the process of confirming visits via SMS, sending one-time links through the API from the service itself. The project is being developed in stages. In the first stage, it is necessary to implement only the basic functionality (MVP) so that the system can be used in real work. After launch and testing, it will gradually be expanded with new modules.Main functionality of the first stage User authorization; Client database; Creating and editing appointments; List of appointments (or a simple calendar); Switching between points of sale; Integration with the SMS operator via API; Sending SMS with any text or link for visit confirmation; Confirmation or cancellation of the visit by the client via a one-time link; Displaying the confirmation status directly next to the client's appointment. At the initial stage, instead of a full calendar, the use of a simple list of appointments by days is allowed. Each day should contain a chronological list of bookings indicating the time, client's name, service, employee, and confirmation status. Later, this list can be replaced with a full calendar without changing the system structure. The system must have the ability to switch between points of sale. Each point of sale has its own list of appointments (or calendar), but they all use a common client database.
Project: landing page for student recruitment for a manicure/pedicure academy based at LÁSKA Beauty Studio (Frýdek-Místek, Czech Republic). Website languages: Czech (main) + Ukrainian (language switch). Goal: application for the course through the form on the website Target audience and course information (programs, prices, target audience profiles): will be provided to the contractor after the work starts. Landing page structure: in the attached file (ready to discuss) Design references Palette and style — brand book will be provided Landing pages that are liked: thezeny.cz, makeupinstitute.cz Functional requirements Responsive layout (desktop/tablet/mobile). Language switch CZ/UA (all content duplicated). Application form with validation Google Maps with the studio in Frýdek-Místek. SEO markup + microdata Course/LocalBusiness. Consent for personal data processing (GDPR).