Equipment for Cutting Cutting
27 USD It is necessary to draw a device to cut the cutting with a plate from M8 to M24 on the cutting machine. The upper pair of holes (from the key side) axes are shifted relatively 45 grads to VERSAL sizes(from 0.5mm to 1.5mm).
Client's review of cooperation with Anatolii Koshevetskyi
Equipment for Cutting CuttingWe have been working with Anatolia since 2014, not one project has been completed, all equipment and equipment have been successfully manufactured and put into operation. As always at the highest level. thank you. I recommend it.
Freelancer's review of cooperation with client
Equipment for Cutting CuttingWe have been working for a long time, it’s all fine. I will be happy to help in the future.
-
10 days2 USD
1669 40 0 10 days2 USD
Good day ! Ready to cooperate. Write to mail [email protected]
Current freelance projects in the category Drawings & Diagrams
Architect for working with point cloudsOrder: 3D Modeling of Facade Cladding and Parapets Based on Point Cloud (BIM / CAD) I am looking for an experienced designer / 3D modeler who will create an accurate geometric model of the facade cladding and roof/parapet area based on the provided point cloud (laser… Drawings & Diagrams, Object Design ∙ 22 hours 4 minutes back ∙ 3 proposals |
Person to create a point cloud of the buildingLocation: Lubin Object type: Aquapark Scope of work: I am looking for an experienced company or freelancer to perform comprehensive 3D laser scanning of the building. The assignment includes: Performing ground scans outside the building. Registering and stitching scans into… Drawings & Diagrams, Object Design ∙ 22 hours 18 minutes back ∙ 1 proposal |
Make calculations and sketches of drawings regarding the slopes on the roof
67 USD
It is necessary to lay out the elements of slopes 1000*500 on the roof from the lowest height to the highest, highlighting the elements in different colors for visual appearance for the installer, and add the specification of the elements. The result of the elements can be… Architectural Design, Drawings & Diagrams ∙ 23 hours 30 minutes back ∙ 3 proposals |
Development of KMD based on the completed projectAccording to the completed project for the separation of floors, it is necessary to develop detailed drawings in KMD for manufacturing at the factory. The project is available in PDF and DWG. Object Design, Drawings & Diagrams ∙ 2 days 2 hours back ∙ 6 proposals |
Develop metal structures for roofs on entrance groups
67 USD
It is necessary to develop metal frames for roofs over entrance groups (entrance group 1 - roof over the gate, entrance group 2 - roof over the gate with a door), specifically: supports for the roof metal structure, the metal structure of the roof itself, materials, fastening… Drawings & Diagrams ∙ 2 days 19 hours back ∙ 7 proposals |