Проект системи опалення для приватного будинку

Design a technological line with equipment selection and calculation of all premises. The composition of the technological equipment:- universal glazing line 600mm 1000 kg/shift- one-shot line for fruit fillings 1000 kg/shift- fitness bar line with grain puffing separation 1000 kg/shift- dragee line 500 kg/shift- craft products department 250 kg/shift- chocolate production department from semi-finished products 1000 kg/shift

There is a vending machine (Necta Sfera H-1.8), it needs to be physically inspected and audited. The tasks are as follows: connecting a new controller (if necessary) power supply; wiring; sensors; new modules. Payment is negotiable The work is physical, we are in the center of Kyiv. 10-14 days are allocated for the work, no more

There is a vending machine (Necta Sfera H-1.8) - it needs to be inspected and prepared for full operation. Main tasks: 1. Modification of the dispensing mechanism (possibly) 2. Replacement of spirals (possibly) 3. Manufacturing of guides (possibly) 4. Refinement of the dispensing tray and adjustment for our product categories 5. Implementation of mechanical contactless and contact payment methods (mandatory) The work is physical, we are in the center of Kyiv. Time for this work: 10-14 days, no more Payment from FOP to FOP (preferably have). Payment is negotiable.

Drawings and material list. For a canopy for the installation of solar panels. A canopy for storing equipment and vehicles. Installation site: s. Zhemchuzhnoe, Pavlohrad district, Dnipropetrovsk region, angle of about 10 degrees. Long panels 620 (230 by 113), needed in two rows about 19 meters in length available. So a frame is needed for the installation of the panels only without covering; the joints of the panels will be sealed later with rubber gaskets. It should withstand wind and snow loads. It is not standing in an open field, there are small buildings nearby, but it is outside the city and on a decent slope. A galvanized mounting profile has already been ordered, with a thickness of 1.4 mm, and it needs purlins about 1 m. So, it will probably be necessary to install a profile pipe to reinforce it, to reduce the number of beams, I think, to minimize deflection. It was planned for installation on the roof, but the roof turned out to be not quite convenient for such installation.

It is necessary to customize a standard (vending) machine to meet personal needs/brand. There is a mechanical vending machine that needs to be transformed into a device with updated functionality. A system integrator, automation engineer, or electronics engineer is needed to develop custom equipment, who can offer technical solutions and implement them. Main tasks: assess the possibility of modifying the existing machine; change the internal structure if necessary; develop a new product dispensing mechanism (if necessary); integrate the necessary electronics and control; create a unique appearance according to my brand; ensure reliable and stable operation of the device. Provide further maintenance of the machine (if necessary) Expand the network of machines for an additional fee I expect the contractor to propose optimal technical solutions, explain possible limitations, and deliver a quality finished product. I am ready to discuss the concept in detail after selecting a contractor. Payment will generally be higher, it all depends on your skills and abilities. Preferred payment from one individual entrepreneur (myself) to another individual entrepreneur (yours) I would appreciate a consultation.