Design of the finished ring and ring in size 16-25 mm. on the finger.
67 USD 16, 17, 18, 19, 20, 21.5, 22, 22.5, 23, 24, 25.The ring with a sublime.A steel shell will be installed in the substrate, and the substrate will later be attached to the ring itself, on the reverse side.The external size of the ring decreases in proportion to the internal.It is necessary to unify as much as possible under all sizes of the ring.That is, make 2 to 3 sizes of the substrate, for all the fingers.What would we draw less of different diamonds of ships.The internal ramser of the ring:
16, 17, 18, 19, 19,5, 20, 21, 21.5, 22, 22.5, 23, 24, 25.Only with the experience of doing such a plan!!The !In your messages please write the price for this work and time and send your past work in the STL program, the ring or ring work.
Client's review of cooperation with Denis Remnev
Design of the finished ring and ring in size 16-25 mm. on the finger.It’s all super! ) Quick and quality, thank you very much!
Freelancer's review of cooperation with Oleh Tril
Design of the finished ring and ring in size 16-25 mm. on the finger.I recommend Olga as an operational customer, always in contact, clearly delivered them. task and timely payment. We will be happy for further cooperation!
-
Winning proposal2 days67 USD
359 14 0 Winning proposal2 days67 USD
Здравствуйте. Есть опыт работы с ювелирными украшениями. Сделаю все точно и качественно. https://www.fl.ru/users/RemnevDenis/portfolio/6118665/garnet-ring/
Цену указал за одно кольцо со всеми размерами
https://www.cgtrader.com/goldenberg
-
2 days78 USD
149 1 0 2 days78 USD
Create models with accuracy up to 0.001mm
I will store it in any format in STL.
I work alone without intermediaries.
Great work experience.
I create models with video, sketch, TZ
You will be satisfied with my work.
-
3 days100 USD
115 3 days100 USD
Здравствуйте, Олег. Сделаю как надо, пишите. С уважением, Александр.
Google Drive
-
1 day111 USD
1820 55 0 1 day111 USD
привет,обращайтесь,сделаем как вам надо
Google Drive
-
7 days134 USD
1064 17 0 7 days134 USD
Здравствуйте!
▶ Сразу говорю - опыта работы именно в ювелирке НЕТ, но есть опыт ПОДОБНОЙ работы (изменение СТЛ и твердотельных моделей под нужные параметры).
⚠ Я вижу это так - реверс-инжиниринг ваших СТЛ в специальной программе с перемоделированием с нуля. И это я смогу сделать точно (потому, что перемоделирование будет в САПР, а не условном "Максе").
---------------------
☀ Портфолио -
Freelancehunt
-
2 days134 USD
1383 33 0 2 days134 USD
Добрый день
Готов выполнить
у меня практически все модели были в stl, так как я работаю в Rhino(потом виз с помощью вирей)
с ювилиркой есть работа пред пред последняя в отзывах, там и результат работы!
Current freelance projects in the category 3D Modeling
Need an engineer for numerical modeling (ANSYS Autodyn / LS-DYNA)We are looking for a specialist to carry out project work on numerical modeling of transient dynamic processes. At the first stage, it is necessary to assess the feasibility of performing calculations, determine the scope of work, and form the project cost. Detailed technical… 3D Modeling, Engineering ∙ 24 minutes back |
Problems with displaying textures of 3D files on Sketchfab
16 USD
Can you tell me why the textures of my 3D files are not displaying and why I have white walls when uploading them to Sketchfab? This happens with any blend, fbx, or glb file; I am working in Blender, version 5.0. I have already clicked on Pack resources or Make paths… 3D Modeling, Web Programming ∙ 1 hour 11 minutes back ∙ 3 proposals |
Make a photo render of the product in SolidWorks
22 USD
Hello, there are devices designed in SolidWorks, and it is necessary to create photo renders from different angles. The file format is STEP. The product has straps that need to be shown in a fastened position (bent). 3D Modeling ∙ 7 hours 50 minutes back ∙ 4 proposals |
3D model of the part according to the sketch in formatA precise 3D model of a metal part is required based on a hand sketch. The main requirement is that the finished file must be strictly in STEP-AP242 format (with tolerances and roughness) for CNC. 3D Modeling, Mechanical Engineering & Instrument Making ∙ 8 hours 59 minutes back ∙ 10 proposals |
Development of the design and layout of the Fesco Ultra POS stand for printing/cutting
It is necessary to develop the design and a ready layout for printing/cutting a tabletop POS stand for the Fesco Ultra brand. The stand will be used for presenting the brand's products: toothpaste, toothbrushes, dental floss, and floss picks. We provide approximate references… 3D Modeling, Industrial Design ∙ 13 hours 32 minutes back ∙ 4 proposals |
Ukraine