Проектирование в revit по готовым чертежам.

A project (reverse engineering) is required based on a ready-made sample for the production of a quick-assembly container. The technological solutions must be implementable for non-specialized production. Dimensions as in the sample https://www.youtube.com/watch?v=FkJGMp0mX-4

It is necessary to perform the calculation of budget documentation according to the specifications and resource information. Requirements for the contractor - availability of a cost engineer certificate.

Task Description: There is a completed project and a budget prepared in the AVK-5 program. It is necessary to professionally adjust the budget and reasonably align it with the specified final amount. Requirements: check the existing budget; adjust the scope of work, rates, materials, and other expenses within the project documentation; bring the total cost to the specified amount; maintain the logic and correctness of all calculations; provide the final budget in AVK-5 format and PDF/Excel; if necessary, briefly explain which items were changed. Important: the budget must remain realistic, technically justified, and suitable for verification, without artificial or unjustified items.

I'm looking for a furniture designer who will prepare a comprehensive custom furniture project for an apartment. Project scope: Bathroom 1.1. Construction of a wall-mounted toilet installation with furniture panels. Approximate dimensions of the entire construction: 254.5 × 70.5 × 16 cm. Height of the toilet installation: 119.5 cm. Distance from the top edge of the installation to the ceiling: 135 cm. 1.2. Cabinet above the toilet installation. 1.3. A small separate cabinet. Approximate dimensions: 254.5 × 26 × 69 cm. 1.4. Countertop above the washing machine. Countertop dimensions: 94 × 65 cm, but it should taper to the right to 43 cm. Height of the countertop installation: 86 cm from the floor. In the lower part on the right, an open niche for a laundry basket approximately 32 × 86 × 43 cm should be provided. Depth of the lower cabinet: 43 cm. Corridor 2.1. A large multifunctional cabinet for outerwear, shoes, household items, and other everyday items. Approximate dimensions of the cabinet: 260.5 × 279.5 × 55.5 cm. 2.2. It is also necessary to develop furniture cladding for the entrance area. Exact dimensions for this part will be provided later. Bedroom 3.1. Custom wardrobe. Approximate dimensions: 120 × 144 × 260 cm. The project must include: Functional planning of all elements. Exact dimensions of the furniture and individual parts. Selection of materials, colors, fittings, hinges, and guides. Technical drawings necessary for the manufacture and assembly of the furniture. Visualizations of the designed furniture. A list of parts for ordering cutting, edging, and subsequent assembly of the furniture. Photos of the rooms, additional dimensions, and examples of the desired design will be provided to the selected designer. Please indicate the cost of completing the entire project, the estimated implementation time, and send examples of previous furniture projects.

A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.