Develop a carrying metal frame for the wall display

The task is to create one basic model with a length of 3 inches (approximately 7.6 cm) and proportionally scale it down to a size of 2 inches (approximately 5.1 cm). The model should be detailed: with a segmented abdomen, legs, antennae, as well as a groove on the back for a hook and a designated area on the side for engraving our logo KUDEX (vector provided). It is important that the geometry is a closed body without negative angles for easy removal of the finished silicone from the mold. A sketch with two angles and the logo is attached to the project. Please indicate your experience with similar tasks and the estimated completion time.

Dear designers and creators of functional wooden furniture, I present to you a mini-project. 1. General Information Subject: Development of detailed drawings for the manufacture of two single beds by custom order with bedside tables. Number of products to be manufactured: 2 (two). 2. References Use the provided photographs (files 1.png, 2.jpeg, 3.jpeg) as visual and conceptual basis. Design: minimalism, massive elements, clean lines, emphasis on the natural texture of wood. 3. Technical Specifications and Dimensions 3.1. Bed and Mattress: - Mattress size: 1000 x 2000 mm. - Mattress height: 160 mm. - Sleeping place height: Designed considering the height of the bedside tables (500 mm). - Base for the mattress: Orthopedic frame with beech slats. The frame construction (rails) should include reliable internal supports for the installation of the slatted base. 3.2. Bedside Tables (freestanding): - Dimensions: Width — 460 mm, Depth — 500 mm, Height — 500 mm (proportional to the height of the bed). - Configuration: Two rows of pull-out drawers. The tables are independent elements and are placed in front of the side panels of the headboard. 3.3. Headboard: - Height: 1400 mm. - Total width: Calculated (Width of the bed + 2 widths of the tables at 460 mm + technological gaps). Approximately: ~1920-1950 mm. - Installation: The headboard is attached exclusively to the bed frame and is an integral part of it. Mounting to the wall is strictly prohibited. - Structure (4 components): - Upper part: Wide horizontal panel across the entire width of the structure. - Two side parts: Vertical panels located behind the bedside tables. Central lower part: A panel located directly behind the mattress and adjacent to the bed frame. 4. Materials and Hardware 4.1. Materials: 100% solid wood. All parts are made from solid wood: visible bodies, facades, headboards, as well as internal boxes of all drawers. Replacements (MDF, particle board) are not used. Finish: Matte transparent varnish. 4.2. Hardware: - For all drawers of the bed and tables, use hidden mounting guides (e.g., Blum Movento, Hettich AvanTech/Actro or analogs). - Opening mechanism: "Push-to-open". No external face hardware (handles) is provided. - Fastening hardware must be hidden where possible and ensure maximum rigidity of the massive structure. 5. Structural Requirements (Assembly/Disassembly) - The product must be designed based on the principle of a modular constructor. - Fasteners (bed connectors, mini-fixes, confirmats, etc.) must ensure easy and intuitive assembly on-site, as well as the possibility of repeated disassembly without loss of rigidity and damage to the wood. 6. Requirements for the Designer/Constructor's Work Result The contractor must provide: - 3D model / Visualization of the developed structure - Complete set of working drawings (front, top, side views with all dimensions). - Assembly diagram of the nodes (especially the connection of the 4 parts of the headboard with the bed). - Specification (detailing) of materials indicating the dimensions of each solid wood part. - Specification of hardware (exact list and quantity of guides and fastening elements). - I also expect questions from you regarding the project regarding the possibility of making up to 4 revisions from my side. Additionally, as a test task, which will also be paid, it will be necessary to design a hexagon shelf. Shelf size Width 350 millimeters Height 400 millimeters. Depth — 130 mm Material: wood (Ash and Beech) Thank you for considering this Mini Project Offer.

It is necessary to develop a design concept and create a 3D visualization of the interior of the first floor of a private house (combined kitchen-living room, open space). Task: Create a 3D visualization of the interior based on the provided references in the style of Modern Organic / Scandinavian. Select furniture, lighting, decor, wall colors, and suggest the placement of appliances. Consider the existing design of the kitchen and stairs, as they will remain unchanged. Only the color of the kitchen facades may be altered. Engineering communications, electrical, plumbing, renovation drawings, etc. are not needed - only the visual concept of the interior. Materials I will provide: floor plan; references of the desired style; photos of the existing space (if necessary). Project parameters: Area of the space — approximately 40 m². I expect to receive: several angles of high-quality 3D visualization; top view plan with furniture placement. After the first version, a few minor adjustments may be possible.

The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.

There is a ready-made plate (the base of the keychain) and a logo that needs to be applied to this plate so that the letters are raised and clear when printed with a 0.4 mm nozzle.