0
0
Budget: 10 USD Deadline: 1 day
Здравствуйте, пишите в личку, оговорим
- Projects -
- Rating -
- Rating 167
Budget: 200 UAH Deadline: 1 day
Здравтвуйте, Сергей.
Готова сотрудничать. Рисую в векторе. Есть опыт по разработке дизайна самоклеек, а также разработке и подготовке макетов для печати на Оракале. Работы смотрите в моем порфолио.
Copy
18 June 2015
0
0
- Projects -
- Rating -
- Rating 123
Budget: 15 USD Deadline: 1 day
Здравствуйте! готова выполнить ваше задание быстро и качественно)
есть опыт в отрисовке машин, смотрите в портфолио
Freelancehunt
Copy
17 June 2015
Proposals concealed
The list does not show proposals concealed by the client or freelancer with a Plus profile, as well as proposals violating rules
Proposals are currently absent
Freelancers are reviewing the task — proposals will appear here soon.
Proposals concealed
The list does not show proposals concealed by the client or freelancer with a Plus profile, as well as proposals violating rules
44
0
- Projects 4
- Rating -
- Rating 723
Budget: 20 USD Deadline: 5 days
Предлагаю свои услуги.
Буду рада видеть Вас среди своих заказчиков !
Freelancehunt
Skype: formanyuk.alena
[email protected]
Copy
5 June 2015
0
0
- Projects -
- Rating -
- Rating 338
Budget: 25 USD Deadline: 2 days
Здравствуйте, имею опыт разработки подобных макетов. Портфолио reklama-lama.mk.ua.
Copy
5 June 2015
102
0
- Projects 91
- Rating -
- Rating 1 188
Budget: 15 USD Deadline: 2 days
Приветствую!
Я та, кого Вы ищете!
И предлагаю свои услуги.
+38 (066) 12-47-957 МТС
[email protected]
daryahohulya.wix.com/portfolio
Freelancehunt
Спасибо за внимание.
С уважением Хохуля Дарья.
Copy
4 June 2015
- Projects -
- Rating -
- Rating 71
Budget: 15 USD Deadline: 3 days
Готов к сотрудничеству, имею опыт подготовки макетов для мебели.
Copy
4 June 2015
0
0
- Projects -
- Rating -
- Rating 248
Budget: 10 USD Deadline: 1 day
Готова помочь.Сделаю быстро и качественно)Обращайтесь
Copy
4 June 2015
- Projects -
- Rating -
- Rating 257
Budget: 15 USD Deadline: 2 days
Буду рада помочь!
Copy
3 June 2015
13
0
- Projects 7
- Rating -
- Rating 454
Budget: 19 USD Deadline: 3 days
+
Мой скайп Nastyasmile4
Copy
3 June 2015
37
0
- Projects 29
- Rating -
- Rating 986
Budget: 1 USD Deadline: 1 day
+
Copy
3 June 2015
2
0
- Projects -
- Rating -
- Rating 173
Budget: 50 USD Deadline: 3 days
! какое кол-во нужно разработать
!! нужны лекала
!!! эта работа стоит дороже - 50$ один макет
Copy
3 June 2015
- Projects -
- Rating -
- Rating 460
Budget: 80 USD Deadline: 6 days
Здравствуйте. Прочитал задание. Ваша работа во-первых не из простых, во-вторых за 20$ не получите что хотите.
Мое портфолио: http://jenya-marchenko.com/
Copy
3 June 2015
787
5
- Projects 743
- Rating 4.9
- Rating 11 422
Budget: 20 USD Deadline: 2 days
+
Copy
3 June 2015
- Projects -
- Rating -
- Rating 299
Budget: 19 USD Deadline: 5 days
Здравствуйте. Имею художественное образование, воображение и умею придумывать новое. Готова разработать для вас оригинальные наклейки, которые булут повторять формообразование вашей мебели. Более точная информация по цене и срокам возможна при прнимании обьма работы.
Copy
3 June 2015
29
0
- Projects 28
- Rating 5.0
- Rating 1 058
Budget: 19 USD Deadline: 3 days
Здравствуйте,готов выполнить ваш проект
качественно,в минимальные сроки ,
с максимальной отдачей.
Skype: aleksandrptushko
Почта: [email protected]
Портфолио: https://freelancehunt.com/my/portfolio
Copy
3 June 2015
19
0
- Projects 10
- Rating -
- Rating 582
Budget: 19 USD Deadline: 1 day
Copy
3 June 2015
2
0
- Projects -
- Rating -
- Rating 432
Budget: 15 USD Deadline: 1 day
Готов обсуждать срок и стоимость!
Отличаюсь качеством своих работ.
Мое портфолио: Freelancehunt
Обращайтесь!
E-mail: [email protected]
Skype: rwg.mykola
Copy
3 June 2015
Proposals concealed
The list does not show proposals concealed by the client or freelancer with a Plus profile, as well as proposals violating rules
Current freelance projects in the category 3D Modeling
67 USD
6 proposals
Dear designers and creators of functional wooden furniture, I present to you a mini-project. 1. General Information Subject: Development of detailed drawings for the manufacture of two single beds by custom order with bedside tables. Number of products to be manufactured: 2 (two). 2. References Use the provided photographs (files 1.png, 2.jpeg, 3.jpeg) as visual and conceptual basis. Design: minimalism, massive elements, clean lines, emphasis on the natural texture of wood. 3. Technical Specifications and Dimensions 3.1. Bed and Mattress: - Mattress size: 1000 x 2000 mm. - Mattress height: 160 mm. - Sleeping place height: Designed considering the height of the bedside tables (500 mm). - Base for the mattress: Orthopedic frame with beech slats. The frame construction (rails) should include reliable internal supports for the installation of the slatted base. 3.2. Bedside Tables (freestanding): - Dimensions: Width — 460 mm, Depth — 500 mm, Height — 500 mm (proportional to the height of the bed). - Configuration: Two rows of pull-out drawers. The tables are independent elements and are placed in front of the side panels of the headboard. 3.3. Headboard: - Height: 1400 mm. - Total width: Calculated (Width of the bed + 2 widths of the tables at 460 mm + technological gaps). Approximately: ~1920-1950 mm. - Installation: The headboard is attached exclusively to the bed frame and is an integral part of it. Mounting to the wall is strictly prohibited. - Structure (4 components): - Upper part: Wide horizontal panel across the entire width of the structure. - Two side parts: Vertical panels located behind the bedside tables. Central lower part: A panel located directly behind the mattress and adjacent to the bed frame. 4. Materials and Hardware 4.1. Materials: 100% solid wood. All parts are made from solid wood: visible bodies, facades, headboards, as well as internal boxes of all drawers. Replacements (MDF, particle board) are not used. Finish: Matte transparent varnish. 4.2. Hardware: - For all drawers of the bed and tables, use hidden mounting guides (e.g., Blum Movento, Hettich AvanTech/Actro or analogs). - Opening mechanism: "Push-to-open". No external face hardware (handles) is provided. - Fastening hardware must be hidden where possible and ensure maximum rigidity of the massive structure. 5. Structural Requirements (Assembly/Disassembly) - The product must be designed based on the principle of a modular constructor. - Fasteners (bed connectors, mini-fixes, confirmats, etc.) must ensure easy and intuitive assembly on-site, as well as the possibility of repeated disassembly without loss of rigidity and damage to the wood. 6. Requirements for the Designer/Constructor's Work Result The contractor must provide: - 3D model / Visualization of the developed structure - Complete set of working drawings (front, top, side views with all dimensions). - Assembly diagram of the nodes (especially the connection of the 4 parts of the headboard with the bed). - Specification (detailing) of materials indicating the dimensions of each solid wood part. - Specification of hardware (exact list and quantity of guides and fastening elements). - I also expect questions from you regarding the project regarding the possibility of making up to 4 revisions from my side. Additionally, as a test task, which will also be paid, it will be necessary to design a hexagon shelf. Shelf size Width 350 millimeters Height 400 millimeters. Depth — 130 mm Material: wood (Ash and Beech) Thank you for considering this Mini Project Offer.
Not specified
20 proposals
It is necessary to develop a design concept and create a 3D visualization of the interior of the first floor of a private house (combined kitchen-living room, open space). Task: Create a 3D visualization of the interior based on the provided references in the style of Modern Organic / Scandinavian. Select furniture, lighting, decor, wall colors, and suggest the placement of appliances. Consider the existing design of the kitchen and stairs, as they will remain unchanged. Only the color of the kitchen facades may be altered. Engineering communications, electrical, plumbing, renovation drawings, etc. are not needed - only the visual concept of the interior. Materials I will provide: floor plan; references of the desired style; photos of the existing space (if necessary). Project parameters: Area of the space — approximately 40 m². I expect to receive: several angles of high-quality 3D visualization; top view plan with furniture placement. After the first version, a few minor adjustments may be possible.
Not specified
13 proposals
You need to create a 3D model and sections from it based on my drawings in Compass. Without changing anything and without inventing anything.
Not specified
12 proposals
The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.
Not specified
25 proposals
There is a ready-made plate (the base of the keychain) and a logo that needs to be applied to this plate so that the letters are raised and clear when printed with a 0.4 mm nozzle.
Loading...
Loading...