Budget: 27000 UAH Deadline: 60 days
Good afternoon!!! Examples of work in the portfolio.... Structural solutions...
Development of the design package
Project contents:
We are handing over the AR Architectural, construction part package, after which all the following sections need to be completed.
The main task is KZ Concrete and reinforced concrete structures. This is what we are looking for a contractor for. If you have experience in developing the above sections, we are open to dialogue.
Budget: 27000 UAH Deadline: 60 days
Good afternoon!!! Examples of work in the portfolio.... Structural solutions...
Budget: 15000 UAH Deadline: 15 days
Hello! Ready to discuss this object regarding the completion of all listed sections. Write in private messages.
Budget: 12000 UAH Deadline: 14 days
Good day Taras.
Design engineer, with over 10 years of experience. I perform constructive solutions in AutoCAD for section KZ.
Budget: 12000 UAH Deadline: 10 days
Good day, Taras!
I propose to develop project documentation in the sections of ETL and BZ.
Cost of work: 5000 hryvnias (2 sections).
I am an electrical engineer with experience in project development:
- internal/external power supply;
- internal/external lighting;
- lightning protection and grounding systems,
as well as low-voltage systems and networks:
- security and fire protection;
- security television;
- control and management systems, including "Smart Home" systems;
- television, time synchronization, notification, communication, and computer networks with Internet access.
I have a certificate as a design engineer.
My portfolio includes several projects I have completed as examples.
Upon request, I will provide other project documentation I have completed.
The cost and deadlines are approximate and will be clarified after forming the technical assignment based on your concept of future solutions, your requirements and requests, as well as interior design projects and/or architectural planning solutions (if available).
Minimum project composition, according to DBN A 2.2-3-2014, Appendix D:
1. Explanatory note;
2. Main drawings:
- plans of external engineering networks and communications and/or plans of internal site networks and structures to them;
- schematic diagrams of engineering equipment installation, fundamental solutions for energy-saving measures;
- technological layouts with placement plans (location) of main equipment;
- electrical connection (connection) diagrams;
- other diagrams necessary for installation work;
3. Equipment, products, and materials specifications;
4. Work volume statement;
5. Questionnaire sheets and dimensional drawings for relevant equipment and products (if needed).
Optimal technical solutions will be offered according to your requirements and wishes within reasonable timeframes and at an affordable price!
If you are interested in the proposal – I am ready to discuss details!
Budget: 19000 UAH Deadline: 14 days
Hello!
Design engineer, 15 years of experience.
Ready to implement structural solutions for the KB section
Budget: 12000 UAH Deadline: 5 days
Good day, I will complete the ETTR project for 4000 UAH, and the BZ for 3000 UAH at home. I will provide examples
Budget: 12000 UAH Deadline: 7 days
I have work experience (5 years) in the field of designing communication systems: both outdoor and indoor (water, sewage, heating, ventilation, electrical, lightning protection, etc.)
Budget: 16000 UAH Deadline: 60 days
Good day. I wish you happiness and good health. Please accept my bid to participate in your interesting project. I will do the drawings and visualization. Thank you very much, I look forward to working with you. Examples of my work are in my portfolio Freelancehunt
Тарас вітаю , якщо будете колись будувати будинок то не робіть плоский дах - він щонайменше на половину дорожчий і доведеться ремонтувати , для нашого клімату плоский дах це зло , коли почне протікати то пошкодиться ремонт всередині приміщень . В кварталі де всі будинки з складними крівлями будинок з плоским дахом буде виглядати невиграшно а щоб зробити красиво потрібно щоб проект робив висококваліфікований архітектор це буде дорого по вартості проекту , дорого і складно в будівництві щоб будівля виглядала гармонійно і презентабельно тобто по-багатому . Я розумію що це так вже домовлено із замовником але на майбутнє візьміть це до уваги . Люди потім мають дуже негативне ставлення якщо їм не розповіли що краще вибрати , цих плоских дахів краще уникати . Ви можете самі проїхатися в себе по району і переконатися як це виглядає на практиці і порозмовляти з власниками що вони думають про таке рішення , та я думаю що ви самі все добре зрозумієте . Особливо якщо будинок стоїть на ділянці яка вниз по рельєфу і на будинок відкривається вигляд зверху , коли будинок на пагорбі або під'їзд на дорога знизу тоді ще можна обіграти це щоб було красивіше але загалом всеодно щоб було красиво або принаймі не гірше ніж сусідні будинки то потрібно дуже постаратися навіть якщо вмієш .
Стосовно цін. - за таку ціну розділ зробити буде проблематично . Хібащо вам хтось надішле козу але всеодно потрібно буде креслити перекриття , перемички , фундамент , владочний план і вентканали . Там багато роботи . З повагою .
Вітаю, напишіть будь ласка в приватні повідомлення, для обговорення деталей по всіх розділах.
A project for a gazebo with a barbecue area needs to be developed, similar to the type on buduy-sam.com, detailing the quantity of materials, step-by-step construction stages, and for the barbecue area, preferably the layout of each row. The foundation is already poured, measuring 3.55 by 6.45 m. There are also railings we want to use, measuring 2.8 m and 3.32 m. We are adding a diagram of how we want it. The diagram was made on this resource: https://app.diagrams.net/, where everything is done in proportions of 1 mm = 1 cm. We can send this diagram separately, as this resource does not allow uploading this file. The walls are to be faced with brick, the roof is a four-pitched roof for bitumen shingles, and the barbecue fireplace should have a width of the fire area of at least 80 cm. The stove should have a flue outlet through a chimney combined with the barbecue fireplace. The project can be for the gazebo and barbecue area without roofing. The main focus is the barbecue area. Thank you all for your proposals!
A model of a house needs to be placed on the plot and the real dimensions of the plot should be tied to the plan. The results with AI are not good. An example is in the photo. A rough version is needed, but as close to the original as possible.
Looking for a systems engineer / DevOps / server hardware specialist to conduct profiling (resource consumption analysis) of a script on BAS and calculate the optimal PC configuration for 24/7 operation. What needs to be done: Analyze resource consumption of the script: Run the provided BAS script in different modes (for example, 1, 5, 10, 20 threads). Conduct profiling of actual consumption: CPU (Single-core / Multi-core), RAM (memory leak dynamics over a long distance), disk (IOPS / read-write), GPU / iGPU (check if there is a load on the graphics). Identify "bottlenecks" and calculate the exact resource consumption coefficient per thread. Calculate the necessary power: Provide an accurate hardware calculation for our target number of threads (for example, 50, 80, 100, 150). Provide configuration recommendations: what processor is needed (Consumer or server Xeon/EPYC), RAM size and frequency, SSD requirements (NVMe IOPS), motherboard (VRM for 24/7), and cooling. Prepare a specification for purchasing a PC: Compile a ready-made budget specification of specific components. Requirements for the performer: Understanding the specifics of Browser Automation Studio or browser automation tools (Puppeteer / Selenium / Playwright). Experience in conducting benchmarks and load testing (Stress-testing / Profiling). Deep understanding of modern hardware (DDR4 vs DDR5, PCIe lanes, VRM, server vs desktop hardware).
I am looking for a designer to develop a partial design project (functional layout of the space, design, visualization, furniture selection) for a children's area with a large sandbox. It is necessary to create a modern, stylish, and functional interior with proper zoning. The project is funded by a grant within a veterans' initiative, so the budget for design is limited. If you are interested in participating, please send your portfolio, estimated cost of work, and timelines for completion.
Need a teacher with experience in online teaching who will demonstrate the use of AutoCAD from scratch to a group of students online. (Preferably - experience in the architectural field) Topics: Introduction to AutoCAD Basic drawing tools Editing drawings Layers and object properties Hatching and formatting Text and tables Dimensions Blocks and attributes External references and drawing organization Preparing drawings for printing Practical work Final project Conditions: 700 UAH/hour. Online, on weekdays, evening time from 18:00