Creation of a heart model from metal

A company, production team, or workshop is needed to implement a large park composition in the form of a cat and mouse as per the attached reference. We are interested not only in the development of a 3D model and drawings but in the full cycle of work: design, manufacturing of the metal frame, exterior decoration, delivery, and installation of the finished figures in the park area.Approximate dimensions of the cat — total length — 8 m; — height of the head — 3.24 m; — height at the withers — 2.34 m; — width of the body — 2.4 m; — length of the head — 1.8 m.Approximate dimensions of the mouse — total height — 1.8 m; — body length — 0.81 m; — height at the withers — 1 m; — total width with ears — 0.9–0.95 m. The figures will be installed outdoors in the park area and will be used as a decorative art object and photo zone.Expected scope of work Development of an original design for the composition based on the reference. Creation and approval of 3D models. Engineering design of load-bearing metal frames. Calculation of the stability of the structures and the method of attachment to the base. Division of the large figure into transportable modules. Manufacturing and anti-corrosion treatment of the metal frame. Formation of the volume of the figures using metal mesh or other suitable technology. Coating with high-quality artificial grass, resistant to sun, precipitation, and frost. Manufacturing of eyes, snouts, ears, and other decorative elements from weather-resistant materials. Delivery of the finished modules to the installation site. Assembly, securing, and installation in the park area. It is necessary to consider wind and snow loads, possible contact with visitors, children's safety, absence of sharp elements, water drainage, and the possibility of further maintenance. Preference will be given to contractors who have their own production or a permanent production team and can take responsibility for the entire turnkey result. In your proposal, please indicate: — which stages you can perform independently; — whether you have your own workshop and installation team; — examples of produced art objects, sculptures, or complex metal structures; — approximate cost of the entire scope of work; — approximate timelines; — terms of delivery and installation; — warranty on the metal frame and exterior coating. Installation location: [Uzhhorod, Zakarpattia region]. The reference is attached. The design must be adapted and made original, without directly copying protected characters.

I want to create a 3D model of a house for the game ETS 2, but when I add the normal map, the lighting of the object breaks. For this, SCS tools are used in Blender. It would be great if the performer has experience with exporting models to ETS 2.

A project needs to be developed for a large park composition in the shape of a cat and a mouse based on the attached visual reference. The figures will be installed outdoors in the park area and will serve as a decorative art object and photo zone. The base of the figures should be made of a sturdy metal frame. The outer covering is planned to be made of artificial grass or another weather-resistant material. Approximate dimensions of the cat: — total length — 8 m; — height of the head — 3.24 m; — height at the withers — 2.34 m; — width of the body — 2.4 m; — length of the head — 1.8 m. Approximate dimensions of the mouse: — total height — 1.8 m; — body length — 0.81 m; — height at the withers — 1 m; — total width with ears — 0.9–0.95 m. What is required from the performer: Develop an artistic 3D model of the two figures while adhering to the specified dimensions and proportions. Prepare visualizations from several angles. Design the internal supporting metal frame. Plan for dividing the large figure into modules for manufacturing, transportation, and assembly. Prepare working drawings of the metal structure with dimensions, profile cross-sections, connection nodes, and attachment points. Develop a method for securing the structure to a concrete base or foundation. Consider wind, snow, and operational loads. Provide specifications for the metal and the approximate weight of the structure. Provide recommendations for anti-corrosion protection, external covering, delivery, and assembly. The figures will be permanently outdoors, so the structure and covering must be resistant to rain, snow, frost, sun, and temperature fluctuations. Formats of the result: — 3D model in STEP, SolidWorks, Blender, or another agreed format; — drawings in PDF and DWG/DXF; — material specifications in PDF or Excel; — renders in JPG/PNG. We are looking for not just a 3D visualizer, but a specialist or team with experience in designing real metal structures. In your proposal, please indicate: — the cost of 3D modeling; — the cost of engineering design and drawings; — timelines for completion; — the software in which the work will be done; — examples of similar projects; — whether you can also organize manufacturing and assembly. The images are a reference. The final design can be adapted and made original.

Looking for a 3D specialist to develop full 3D models of products for a beauty brand. It is necessary to create a set of 3D models of beauty products for placement on the website (interactive product cards). References will be provided in personal messages - a model of a case for storing cosmetic sponges/brushes (a compact case with magnetic closure, round or cylindrical shape). The model will be used for interactive viewing on the website, so correct geometry, clean topology, and configured materials are important. Project details and references will be in personal messages. If successful, I am ready to assign further tasks, as a series of models for several product lines is planned.

ViYar. It is necessary to develop a design for an office desk and prepare files for ordering at ViYar. A performer with experience and examples of work is needed. I am not oriented on the cost of similar work, so please suggest prices. In case of successful execution, it will be necessary to design six more products (filing cabinets and a manager's desk).