Budget: 0 EUR Deadline: 1 day
Go to turn!
Details in the personal letter.
Our work on the profile or on the website: http://vinpixels.com
Email: [email protected]
by: vinpixels
Budget: 0 EUR Deadline: 1 day
Good day, there is a link to VK with a friend we do
Gppa in contact http://vk.com/vizitki_listovki_reklama
Budget: 100 EUR Deadline: 1 day
Good day . Ready for remote cooperation. 5 years experience in polygraphy. Knowledge of pre-print preparation, for different methods of printing. For more information, write to the face.
- Projects -
- Rating -
- Rating 176
Budget: 0 EUR Deadline: 1 day
Good day .
Ready to cooperate.
Prices for projects are individual.
Budget: 3000 UAH Deadline: 10 days
Good day .
Ready to do this work.
More detail can be discussed by personal mail.
Budget: 0 UAH Deadline: 2 days
Ready for cooperation
Banner from 80 UAH
Flowers of 100 UAH
Tickets from 75 UAH
Sites of 450 UAH
I am responsible for the robot.
Budget: 10 USD Deadline: 1 day
+
- Projects 3
- Rating -
- Rating 403
Budget: 0 EUR Deadline: 5 days
GIF BANNER 10 U.E.
Flash 20 U.E.
Visitors 20 U.S.
Website design of 100 U.E.
Budget: 0 EUR Deadline: 1 day
Hello, I am a student, I will learn on Graphic Designer, in graphic programs (Adobe Photoshop, Adobe Illustrator, CorelDRAW, Adobe InDesign, Adobe Dreamweaver, and many others.) I have more than 3 years of work experience. I work with HTML5 and CSS3. I can draw computer graphics, illustrations both on the computer and by hand. I can emphasize the following qualities: communication, responsibility, literacy, flexibility of thinking, creativity, initiativity, a great desire to work. Currently I’m working on creating a portfolio, so I’m going to work with the maximum donation and with a relatively small remuneration. Ready to discuss everything. Write to me at [email protected] or call at +380509424230.
Budget: 0 EUR Deadline: 2 days
HTTP://assets.freelancehunt.com/snippet/6b/6c/109160/%D0%B1%D0%B0%D0%BD%D0%B5%D1%80+%D0%B6%D0%B8%D0%B2%D0%BE%D0%B5+%D0%BF%D0%B8%D0%B2%D0%BE.png
Only the schedule. I will take any difficulties for work.
Budget: 0 EUR Deadline: 1 day
Look at the profile, I will do the work creatively.
Budget: 0 EUR Deadline: 1 day
Good day ! Ready to cooperate with you!
Development of banners for the Russian Olympic Committee, and other major organizations
Examples will be sent
The Designer! I perform work of any difficulty quality and timely.
Portfolio here on the website!
Some of the works:
HTTP://olympic.ru/
HTTP://www.modjo-club.com
HTTP://stadium.ru/
Telephone number: +38 (099) 717-20-75
by Skype: ZasRUNec
Email to: [email protected]
- Projects -
- Rating -
- Rating 216
Budget: 0 EUR Deadline: 1 day
shortly .
Design of Polygraphy, Web Design, Flash, 3D, Video Design/Composing
Payment by project, prepaid.
a more detailed list of works, according to the
address /example - polygraphy of the visit card/ - on request.
Examples of works
https://www.fl.ru/users/silver_dragon/
https://vimeo.com/user17593876/videos
ICQ 564810896
by skype titanium dragon
Email to [email protected]
Budget: 0 EUR Deadline: 1 day
My portfolio
HTTPS://picasaweb.google.com/117334217354002829300
Contact in the profile
Budget: 15 USD Deadline: 2 days
I’m working with banners: static hyph flash.
I will provide my portfolio with a personal mail.
- Projects -
- Rating -
- Rating 284
Budget: 0 EUR Deadline: 1 day
Responsible, careful, look at the portfolio.
Budget: 0 EUR Deadline: 1 day
Good day ! I am interested in your proposal. The portfolio of my profile contains examples of my work. I will write more in personal messages.
Budget: 0 EUR Deadline: 1 day
Budget: 0 EUR Deadline: 1 day
Look at the portfolio and contact.
Budget: 0 EUR Deadline: 2 days
Here is my portfolio: http://studiobanners.ru/?page_id=13 please contact us.
- Projects -
- Rating -
- Rating 188
Budget: 0 EUR Deadline: 2 days
Hello to you. Interested in your proposal. Ready to start.
Communicable, responsible, always on contact, compliance with deadlines.
I work according to the customer's wishes, I always work.
Portfolio https://old.fl.ru/users/Mila1717/
vk.com/ludmiladerevyankina
[email protected]
+380632000381
+30661613521
Budget: 0 EUR Deadline: 2 days
Call us, we will do everything.
- Projects -
- Rating -
- Rating 71
Budget: 1 EUR Deadline: 1 day
Hello to you.
I am engaged in the development of flash apps:
The Banner
The presentations
The Animation
The Hat
The Clock
The galleries
maps / schemes
Modification of templates of sites
The Players
The Screen Savers
The Games
The portfolio:
weblancer_net/users/Alex_An/portfolio/
The contacts:
ICQ: 329-20-38-40
Email: [email protected]
I will be happy to cooperate.
Alina Bogdanenko
Winning proposal- Projects -
- Rating -
- Rating 120
Budget: 1 EUR Deadline: 1 day
Hello to you. Take a look at my candidacy.
Experience in creating websites on cms WordPress - 3 years
From graphics - the development of hates for websites. A small portfolio on another resource, according to the rules to insert it in the comments of the bet I can't (I'll send it to LS)
I am learning quickly and responsible.
Budget: 0 EUR Deadline: 1 day
Ready to discuss
Banner for $3
Flowers from $5
Landing from $60
Website for $100
Visit card from $5
With respect, Catherine
Proposals concealed
Proposals are currently absent
Proposals concealed
-
Kostya Syrma 3 February 2014Добрый день, есть ссылка на VK с другом занимаемся грппа в контакте http://vk.com/vizitki_listovki_reklama
-
Vahan Stepanyan 3 February 2014Здравствуйте,меня зовут Ваган,я специализируюсь на производстве 3d анимационных рекламных роликов,интерьер-экстерьер,видеоклипов,моделирование,проработки текстур,навок работы с освещением,анимация,владение любим пакетом 3ds max моделирования...а так же недавно я снял клип в котором я режиссер.У меня есть опыт работы,работал в нескольких компаниях в Сочи и в Армении.
Current freelance projects in the category 3D Modeling
Dear designers and creators of functional wooden furniture, I present to you a mini-project. 1. General Information Subject: Development of detailed drawings for the manufacture of two single beds by custom order with bedside tables. Number of products to be manufactured: 2 (two). 2. References Use the provided photographs (files 1.png, 2.jpeg, 3.jpeg) as visual and conceptual basis. Design: minimalism, massive elements, clean lines, emphasis on the natural texture of wood. 3. Technical Specifications and Dimensions 3.1. Bed and Mattress: - Mattress size: 1000 x 2000 mm. - Mattress height: 160 mm. - Sleeping place height: Designed considering the height of the bedside tables (500 mm). - Base for the mattress: Orthopedic frame with beech slats. The frame construction (rails) should include reliable internal supports for the installation of the slatted base. 3.2. Bedside Tables (freestanding): - Dimensions: Width — 460 mm, Depth — 500 mm, Height — 500 mm (proportional to the height of the bed). - Configuration: Two rows of pull-out drawers. The tables are independent elements and are placed in front of the side panels of the headboard. 3.3. Headboard: - Height: 1400 mm. - Total width: Calculated (Width of the bed + 2 widths of the tables at 460 mm + technological gaps). Approximately: ~1920-1950 mm. - Installation: The headboard is attached exclusively to the bed frame and is an integral part of it. Mounting to the wall is strictly prohibited. - Structure (4 components): - Upper part: Wide horizontal panel across the entire width of the structure. - Two side parts: Vertical panels located behind the bedside tables. Central lower part: A panel located directly behind the mattress and adjacent to the bed frame. 4. Materials and Hardware 4.1. Materials: 100% solid wood. All parts are made from solid wood: visible bodies, facades, headboards, as well as internal boxes of all drawers. Replacements (MDF, particle board) are not used. Finish: Matte transparent varnish. 4.2. Hardware: - For all drawers of the bed and tables, use hidden mounting guides (e.g., Blum Movento, Hettich AvanTech/Actro or analogs). - Opening mechanism: "Push-to-open". No external face hardware (handles) is provided. - Fastening hardware must be hidden where possible and ensure maximum rigidity of the massive structure. 5. Structural Requirements (Assembly/Disassembly) - The product must be designed based on the principle of a modular constructor. - Fasteners (bed connectors, mini-fixes, confirmats, etc.) must ensure easy and intuitive assembly on-site, as well as the possibility of repeated disassembly without loss of rigidity and damage to the wood. 6. Requirements for the Designer/Constructor's Work Result The contractor must provide: - 3D model / Visualization of the developed structure - Complete set of working drawings (front, top, side views with all dimensions). - Assembly diagram of the nodes (especially the connection of the 4 parts of the headboard with the bed). - Specification (detailing) of materials indicating the dimensions of each solid wood part. - Specification of hardware (exact list and quantity of guides and fastening elements). - I also expect questions from you regarding the project regarding the possibility of making up to 4 revisions from my side. Additionally, as a test task, which will also be paid, it will be necessary to design a hexagon shelf. Shelf size Width 350 millimeters Height 400 millimeters. Depth — 130 mm Material: wood (Ash and Beech) Thank you for considering this Mini Project Offer.
The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.
There is a ready-made plate (the base of the keychain) and a logo that needs to be applied to this plate so that the letters are raised and clear when printed with a 0.4 mm nozzle.
We are looking for a specialist who professionally engages in optimizing high-polygon car models for GTA V. Our main task is to obtain models that combine maximum performance with the highest possible visual quality. If you can find this balance, we would be happy to establish a long-term collaboration. Main Responsibilities Performing retopology of car models. Optimizing the polygon mesh to an optimal number of triangles without noticeable loss of quality. Re-baking textures (Normal, AO, Curvature, and others) after optimization. Preserving proportions, geometry, and all key details of the car. Optimizing textures, materials, and model structure according to the requirements of GTA V. Creating LOD levels. Preparing collisions. Preparing the model fully ready for integration into GTA V. Our Expectations Practical experience in retopology and optimization of 3D car models. Proficient use of Blender or other professional 3D packages. Experience with baking PBR textures. Understanding the principles of model optimization for real-time games. Experience preparing vehicles specifically for GTA V will be a significant advantage. Understanding the specifics of LOD, collisions, materials, textures, and the limitations of the GTA V engine. Ability to work quickly without sacrificing quality. What We Provide Source car models. Constant workflow. Long-term collaboration. Competitive payment depending on the complexity of the model and quality of execution. Important For us, quality and speed are equally important. The final result must be maximally optimized for GTA V, have clean topology, optimized textures, correctly configured materials, while preserving the appearance of both the exterior and interior of the car as much as possible. We are looking for a specialist who can regularly prepare high-quality models without the need for additional revisions after submission. Please propose a cost per car and indicate the time frame in which you can complete the work.
Welcome! The company Adaptis needs to update graphic materials for A+ content on our website and on Amazon. We already have a fully prepared design for A+ content (cards, banners, infographics), but they depict a different shape of our product. We have changed the product design and now have its new 3D model. The main task is to create realistic renders of the new product shape and carefully "fit" them into the existing banners instead of the old shape. And immediately your cases