Budget: 2500 UAH Deadline: 2 days
Hello ready to the robot, I have a great experience of robots with wooden houses
Budget: 2500 RUB Deadline: 4 days
Good day, you are interested in the quality of the visualizations you need.
Term and price after the discussion.
Behance
Budget: 2500 RUB Deadline: 5 days
Good day .
If the executive’s stay in Russia is not so important, then I’m ready to do the job. The cost of the building fits, the time of about 4-5 days is possible and faster, depending on the specific structure and details. I am ready to discuss and start work.
Portfolio: http://www.coroflot.com/vitalikvo
With respect, Vitaly
Budget: 10000 RUB Deadline: 7 days
Hello to you. Ready to discuss details and cooperate.
Examples of 3D visualizations and 2D planning by link:
Freelancehunt
Google Drive
Contact for Operational Communication:
Viber/WhatsApp: +380963545710
Telegram: @nychyporuk_art
Email: [email protected]
I will wait for a feedback.
Budget: 2500 RUB Deadline: 1 day
If you trust me work on your task, you will be pleased to see what I draw for you.
Budget: 2500 RUB Deadline: 1 day
Hello to you.
Exteries in the portfolio.
Currently free.
Go to turn.
There are a lot of 3D models.
Budget: 16000 RUB Deadline: 4 days
Hello, we will work with you, a team of architects and visualizers will perform the best way to build houses with the best planning.
The price is indicated for the project of one house with visualizations and planning.
Examples of works see on the website
Website http://jay-diz.com.ua/
Section by external http://jay-diz.com.ua/exterior.html
Post [email protected]
Budget: 2500 RUB Deadline: 2 days
Hello to you! Interested in cooperation. I’ve been looking for such a project for a long time and I want to make a house from the brush. Write, send the TZ, we will discuss. Payment or seafood or webman.
Freelancehunt
Budget: 2500 RUB Deadline: 1 day
Good day !
Interested in the project. Can I find out details? The level of desired visualizations.
My visualizations and planning can be seen in the portfolio:
Freelancehunt
Viktoriya Lazarchik
Winning proposal- Projects 34
- Rating -
- Rating 1 194
Budget: 2500 RUB Deadline: 4 days
Good day Paul.
I would like to offer you my services. I work in architectural visualization and design. Education of an architect.
You can see my portfolio here:
Behance
I would like to know more about this work.
1 . Can you send a picture of the example quality of the picture you would like to get at the end?
2nd Do you need to develop the environment around the house?
Three How many rocks do you need for each house?
4 . In what period should the visualization be performed?
If you have any further questions, please write to me.
I will be glad to work with you.
With respect to Victoria.
Lions in Ukraine.
Budget: 5000 RUB Deadline: 1 day
Portfolio - Behance
Email - [email protected]
- Projects 4
- Rating -
- Rating 421
Budget: 100 UAH Deadline: 1 day
Good evening, very interested in your offer, ready to discuss details and price, I work quickly.
Proposals concealed
Proposals are currently absent
-
Levon Gasparyan 12 December 2017Я могу это сделать.Если вы будете доверять мне пожалуйста напишите и мы поговорим про деталя..
-
Pavel Pavel
12 December 2017
Добрый вечер, Levon! Есть ли у Вас примеры выполненных визуализаций именно каркасных домов в портфолио?
Current freelance projects in the category 3D Modeling
The task is to create one basic model with a length of 3 inches (approximately 7.6 cm) and proportionally scale it down to a size of 2 inches (approximately 5.1 cm). The model should be detailed: with a segmented abdomen, legs, antennae, as well as a groove on the back for a hook and a designated area on the side for engraving our logo KUDEX (vector provided). It is important that the geometry is a closed body without negative angles for easy removal of the finished silicone from the mold. A sketch with two angles and the logo is attached to the project. Please indicate your experience with similar tasks and the estimated completion time.
Dear designers and creators of functional wooden furniture, I present to you a mini-project. 1. General Information Subject: Development of detailed drawings for the manufacture of two single beds by custom order with bedside tables. Number of products to be manufactured: 2 (two). 2. References Use the provided photographs (files 1.png, 2.jpeg, 3.jpeg) as visual and conceptual basis. Design: minimalism, massive elements, clean lines, emphasis on the natural texture of wood. 3. Technical Specifications and Dimensions 3.1. Bed and Mattress: - Mattress size: 1000 x 2000 mm. - Mattress height: 160 mm. - Sleeping place height: Designed considering the height of the bedside tables (500 mm). - Base for the mattress: Orthopedic frame with beech slats. The frame construction (rails) should include reliable internal supports for the installation of the slatted base. 3.2. Bedside Tables (freestanding): - Dimensions: Width — 460 mm, Depth — 500 mm, Height — 500 mm (proportional to the height of the bed). - Configuration: Two rows of pull-out drawers. The tables are independent elements and are placed in front of the side panels of the headboard. 3.3. Headboard: - Height: 1400 mm. - Total width: Calculated (Width of the bed + 2 widths of the tables at 460 mm + technological gaps). Approximately: ~1920-1950 mm. - Installation: The headboard is attached exclusively to the bed frame and is an integral part of it. Mounting to the wall is strictly prohibited. - Structure (4 components): - Upper part: Wide horizontal panel across the entire width of the structure. - Two side parts: Vertical panels located behind the bedside tables. Central lower part: A panel located directly behind the mattress and adjacent to the bed frame. 4. Materials and Hardware 4.1. Materials: 100% solid wood. All parts are made from solid wood: visible bodies, facades, headboards, as well as internal boxes of all drawers. Replacements (MDF, particle board) are not used. Finish: Matte transparent varnish. 4.2. Hardware: - For all drawers of the bed and tables, use hidden mounting guides (e.g., Blum Movento, Hettich AvanTech/Actro or analogs). - Opening mechanism: "Push-to-open". No external face hardware (handles) is provided. - Fastening hardware must be hidden where possible and ensure maximum rigidity of the massive structure. 5. Structural Requirements (Assembly/Disassembly) - The product must be designed based on the principle of a modular constructor. - Fasteners (bed connectors, mini-fixes, confirmats, etc.) must ensure easy and intuitive assembly on-site, as well as the possibility of repeated disassembly without loss of rigidity and damage to the wood. 6. Requirements for the Designer/Constructor's Work Result The contractor must provide: - 3D model / Visualization of the developed structure - Complete set of working drawings (front, top, side views with all dimensions). - Assembly diagram of the nodes (especially the connection of the 4 parts of the headboard with the bed). - Specification (detailing) of materials indicating the dimensions of each solid wood part. - Specification of hardware (exact list and quantity of guides and fastening elements). - I also expect questions from you regarding the project regarding the possibility of making up to 4 revisions from my side. Additionally, as a test task, which will also be paid, it will be necessary to design a hexagon shelf. Shelf size Width 350 millimeters Height 400 millimeters. Depth — 130 mm Material: wood (Ash and Beech) Thank you for considering this Mini Project Offer.
It is necessary to develop a design concept and create a 3D visualization of the interior of the first floor of a private house (combined kitchen-living room, open space). Task: Create a 3D visualization of the interior based on the provided references in the style of Modern Organic / Scandinavian. Select furniture, lighting, decor, wall colors, and suggest the placement of appliances. Consider the existing design of the kitchen and stairs, as they will remain unchanged. Only the color of the kitchen facades may be altered. Engineering communications, electrical, plumbing, renovation drawings, etc. are not needed - only the visual concept of the interior. Materials I will provide: floor plan; references of the desired style; photos of the existing space (if necessary). Project parameters: Area of the space — approximately 40 m². I expect to receive: several angles of high-quality 3D visualization; top view plan with furniture placement. After the first version, a few minor adjustments may be possible.
You need to create a 3D model and sections from it based on my drawings in Compass. Without changing anything and without inventing anything.
The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.
