Budget: 1000 UAH Deadline: 3 days
Готов выполнить Ваш заказ. Делал подобную работу ранее. Помещу объект на фото, будут тени и все что нужно. С готовой моделью цена и срок как указал.
Есть конструкция (аттракцион зип лайн) 3д модель которого нужно поместить на фотографию в правильном ракурсе. Сделать в 3д максе изображения соответствующих ракурсов и поместит на фотографию как на примере. Пример очень отдаленный, выглядеть должно не так убого. 3д модель нужно найти бесплатную, если нет бесплатной - купим платную. Укажите, пожалуйста, цену и сроки.
Budget: 1000 UAH Deadline: 3 days
Готов выполнить Ваш заказ. Делал подобную работу ранее. Помещу объект на фото, будут тени и все что нужно. С готовой моделью цена и срок как указал.
Budget: 600 UAH Deadline: 2 days
Здравствуйте!
Работаю в 3д макс на протяжении 10 лет.
Если предоставите 3д модель сделаю за 1 день
Budget: 500 UAH Deadline: 1 day
Добрый день.
Предлагаю свои услуги в реализации Вашего проекта!
Budget: 1000 UAH Deadline: 3 days
Здравсвуй!
Могу все слелать в cinema 4d, не отличите что объект будет вставлен в фото
Budget: 1000 UAH Deadline: 3 days
Здравствуйте! Занимаюсь архитектурными визуализациями. Могу смоделить что-то подобное и зарендерить, обращайтесь!
Мое портфолио: Behance
Budget: 750 UAH Deadline: 3 days
Здравствуйте,свяжитесь со мной. Выполню ваш заказ качественно.
Портфолио
http://shrynchenko.xyz/
Budget: 600 UAH Deadline: 2 days
Готов выполнить Ваш заказ. Имею опыт работы в программах для анализа перспективы изображения. Закамерамаплю окружение, постараюсь воссоздать освещение + немного фейковых отражений и сделать приличный рендер. У меня есть конечно пару вопросов по поводу модели и фото. Желательно увидеть фото, от наличия на нем прямых объектов( дороги, здания) легче будет вычислить перспективу.
Budget: 2800 UAH Deadline: 3 days
Стоимость формируется от требуемой задачи в финале, чем качественнее
виз и детализация - тем, соответственно, работа оценивается выше.
Вопрос по срокам исполнения не уместен до тех пор пока у Вас нет готового ТЗ для
полного его изучения.
На сроки исполнения влияет множество факторов, начиная от моделинга, текстурирования, вплоть до не полного ТЗ.
Обширное портфолио по ссылке ниже:
Behance
Budget: 567 UAH Deadline: 1 day
Здравствуйте! Могу выполнить Ваш заказ.
Примеры работ
Google Drive
Budget: 500 UAH Deadline: 3 days
Добрый день!
Заинтересовало Ваше предложение.
На постоянной основе выполняю такие работы. Будет выглядеть натуралистично.
Примеры подобных работ: http://ganniro.3ddd.ru/album/33325/show
Budget: 1000 UAH Deadline: 1 day
Здравствуйте, готов выполнить, есть опыт подобной работы. Могу приступить прямо сейчас. Модели нет.
Budget: 800 UAH Deadline: 1 day
Здравствуйте.
Я занимаюсь 3d моделированием и 3d визуализацией, а также разработкой концепций разной степени сложности архитектурных проектов и не только, дизайном интерьеров и экстерьеров, предметным дизайном, разработка прототипов мебели и промышленным дизайном для серийного производства. Знания в эргономике, нормативной базы в области проектирования. Большой практический опыт. Творческий подход к работе. Работаю в программах 3ds Max 2020+V-Ray 5 +Corona 5.2, SketchUp 2020+V-Ray 5, AutoCAD 2020, Revit 2020, Photoshop 2020, Lumion 10, After Effects 2020, Archicad 23. Моё портфолио http://3ddomkiev.wixsite.com/3ddom , Behance
как же мне нравятся такие проекты, где
3д модель нужно найти бесплатную
за поиск бесплатного отдельно оплачиваете?
A 3D model of a pocket mirror needs to be created for CNC production from wood. Please contact with proposals. Thank you.
A person is needed who can work with 3D animation. Task: recreate a 3D image on a face of a similar nature and then overlay this on "Before" and "After," as a result of transformation after the procedure. Important: to do it manually (NOT AI), own idea and interpretation.
1. General GoalCreate a dynamic interface element based on the provided template, consisting of three angles of a cup (Front cup, Back view, Side view). When clicking on any print option, the image must change simultaneously and synchronously on all three cups considering the angle, volume, light, and shadows for each position. 2. Output File Requirements (For Designer / PSD Template)The basic layout must be prepared in PSD format. To automate and facilitate print replacements, the structure should be based on linked smart objects (Linked / Duplicated Smart Objects).Main requirement for PSD architecture: The layout must have one master smart object with the print layout. The designer duplicates it for three angles, but applies individual transformations to each duplicate: For the front cup: Print deformation at the center (Transform -> Warp or Cylinder). For the back view: Texture shift (showing the reverse side of the layout) + cylinder deformation. For the side view (near the handle): Texture shift to the edge + stronger perspective compression closer to the handle.Layer structure for each of the 3 angles: Group "Shadows & Highlights" (Top layer of the angle): Individual for each angle. Highlights: Layer with glossy reflections. Mode: Screen or Linear Dodge. Shadows: Layer with a gradient that defines the cylindrical volume. Mode: Multiply. Layer "YOUR PRINT" (Duplicated Smart Object): Has individual deformation and shift settings for the specific angle. Layer "Cup Base" (Base of the cup): Body, handle, and inner part at their angle. Layer "Global Shadow": Shadow on the surface under each cup.Note for the designer: When saving a new design inside the master smart object, the print must automatically and correctly update on all three angles of the cup in PSD. 4. Behavior Logic and Animation
Quality visualization of an apartment is needed, 3d max, corona render, according to the technical specifications, with an area of 170 m2, in a modern style, deadline - 1 month, cost 6$/m2.
It is necessary to develop the design and a ready layout for printing/cutting a tabletop POS stand for the Fesco Ultra brand. The stand will be used for presenting the brand's products: toothpaste, toothbrushes, dental floss, and floss picks. We provide approximate references for better understanding below. The left side of the stand - shelves/niches for Fesco Ultra toothpaste. It is necessary to provide space for 4 tubes: 2 on top and 2 on the bottom. The right side of the stand - area for toothbrushes and floss. It is necessary to provide space for the vertical placement of toothbrush packaging (so that they are securely held), as well as a lower shelf/niche for dental floss and floss picks. The central part of the stand - game mechanics. At the top, the visitor drops a ball, it falls down, bouncing off pins/obstacles, and lands in one of the lower compartments. Each compartment will have a prize or action written on it. At the bottom of the central game panel, separate compartments for game results need to be provided, each of which must be equipped with a place to insert a variable card with the name of the prize. The design should allow for quick manual card changes. The solution can be in the form of slots, grooves, or transparent holders - the main thing is that the cards can be easily inserted, removed, and replaced. It is important that the mechanics work: the ball must fall freely, not get stuck between the pins, not fly out of the stand, and land in one of the compartments. It is necessary to think through the placement of the pins, edges, transparent front panel/protection, hole or area for launching the ball, as well as the lower compartments for fixing the game result. It is also important to consider how to easily retrieve the ball. As a result, we need to obtain: A structural drawing of the stand at a scale of 1:1. A layout for printing and cutting/milling. Separate layers for printing, cutting, creasing/folds, and technical elements. A visualization of the finished stand with products. Final files in formats suitable for production transfer. On our part, we will provide everything necessary for the work: product dimensions, logos, photos/layouts of goods, references, style preferences, and other materials needed to create the finished stand layout. We are open to collaboration. The cost of work is negotiable and can be discussed after clarifying all project details.