Анализ Плечевого Сустава в Ansys
Существует два этапа в проекте.
Первый:
Статический анализ плечевого сустава. Нужно в существующую модель добавить связи/привязки с заданными параметрами (подвесить на пружинах/жестких элементах аналоги мышц и сухожилий) детали и нагрузить всю сборку в разных положениях. Получить контактные напряжения/усилия в определенных точках.
Applications 1
-
Добрый день , заинтересовал ваш проект готов обсудить, если актуально пишите на ник в телеграм
-
добрый день! пришлите вашу почту.
-
-
Добрый день. заинтересовал Ваш проект. Готов обсудить все. напишите мне на почту. [email protected]. Спасибо
-
Добрый день! Отправил
-
Добрый день. И мне высылайте ТЗ. А то тут не понятно. [email protected]
-
Ох тут и движуха в проекте! просто жесть!
-
Current freelance projects in the category Engineering
Design of a remote opening mechanism for railway car hatches at the elevator.
It is necessary to design a mechanism for the remote opening of hopper lids (railway grain car) at an operating elevator. The unloading area has a roof and allows for unloading on 2 tracks simultaneously. The system must move from both sides of each track and have dimensions of… Engineering, Mechanical Engineering & Instrument Making ∙ 1 hour 15 minutes back |
Dry Steam OvenProgramming a 5-zone tunnel furnace based on Siemens S7 (setting furnace parameters in HMI, controlling temperature, steam concentration, conveyor speed, exhaust, and safety systems) Engineering, Mechanical Engineering & Instrument Making ∙ 4 hours 51 minutes back ∙ 3 proposals |
Need an engineer for numerical modeling (ANSYS Autodyn / LS-DYNA)We are looking for a specialist to carry out project work on numerical modeling of transient dynamic processes. At the first stage, it is necessary to assess the feasibility of performing calculations, determine the scope of work, and form the project cost. Detailed technical… 3D Modeling, Engineering ∙ 14 hours 37 minutes back ∙ 2 proposals |
Sheet metal cabinet 0.8 mm
22 USD
Design of a Metal Locker CabinetGeneral Information It is necessary to develop a complete set of drawings and a 3D model of the locker cabinet for further production from sheet metal.Dimensions of the Product Height — 2100 mm. Width — 600 mm. Depth — 485 mm.Construction Two… Engineering, Drawings & Diagrams ∙ 4 days 1 hour back ∙ 11 proposals |
I am looking for a design engineer to develop a compact mechanism with electric drive.There is a preliminary concept for the lifting mechanism of a compact product. Since I am not a design engineer, I cannot assess how optimal the chosen scheme is. It is necessary to: evaluate the proposed concept; if it is viable — refine it; if there is a better solution —… Engineering, Object Design ∙ 4 days 21 hours back ∙ 7 proposals |
Dnepr