Design for whiskey
1 weight enough for the lower part to overcome the weight of a liter bottle of whisky
2 in the bottom base should be a cut deepening to half a glass.a glass of whisky.Also deepening should be frontally cut, i.e. we do not get a glass into the opening but put forward in a special deepening niche.The height from the bottom of the glass to the bottom of the substrate will depend on which volume the lower substrate should be to ensure sufficient stability.
3 on the acation/deep bottom must have a space for laser graving on the tree or for fixing a 70x30 laton table.You can consider this part from a deep massive brush in which all the necessary technological openings of deepening will be freezed, etc.It can be both with straight corners and rounded futuristic relief.Possible combination with marble or granite.This will allow you to make a less thick foundation as granite or marble is 3 times heavier than a dust.
4 pipe, cran, should be from the available on the market ready solutions, it can be both latun and stainless chromium or honey depending on the combination of cran, triangle, cran and sauce for the bottle you will find ( alibaba, aliexpress, prom).The two main parameters are a good aesthetic look so that the device perfectly supplements any table.The 5 weight of the device will be a few kilograms, so you need to provide a convenient catch for the hand to turn the device and settle on a bottle or think about a way of settling the bottle as on the video.It would be convenient not to raise and to move to the edge of the table to take the upper part and incline down by 110-120 degrees or more to dress the bottle and surface it all together in a vertical position.That is, if this method is considered then the braking zone of the device to the table should be stable.6 on the added photo of the bakery tube around the bottle has not understood its function, exclusively aesthetic, but in our case it is necessary to think that it carries the support function possible some fast-track stainless throat bottle or the same combination of the bottle with the device to be strong enough constructively
7 appearances can be:
Perfectly made wood with freshness
It looks like an old tree.What we stop will depend on the design idea.The thickness of 690
Acacia thickness 800
Marble and Granite 2600
Applications 2
-
5 days111 USD
1551 29 1 1 5 days111 USD
Good day !
I will be happy to get a project. My portfolio and detailed information about me in the profile:
Freelancehunt
Thank you,
With respect,
Maxim Skvortsov
-
4 days56 USD
555 29 2 4 days56 USD
Good day . I was interested in the offer. I have experience working with similar projects, I work as an engineer - designer for more than 5 years. I’m happy to do my job. Examples of accomplished (analogical) works can be provided to you. Write for clarification!The !
-
3 days45 USD
3825 73 0 3 days45 USD
Good day .
I will make the stand according to your TZ.
If you take the basis of standard products (triangles, muffs, cranes...), then you can develop a universal solution with different materials (laton / steel).
1 day (oriented to the stock) will be necessary to spend on the selection of the packaging, the preparation of their models and the search for the compression in the place of the bottle installation. Everything else can be agreed in terms of design.
Current freelance projects in the category 3D Modeling
Backpack design*Backpack design: visualization and 3D model** Looking for a product designer or industrial designer with experience in accessories, bags, or gear. **What needs to be done:** — Develop the appearance of the backpack based on my references and wishes — Prepare high-quality… 3D Modeling, AI Art ∙ 6 hours 46 minutes back ∙ 2 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 14 hours 48 minutes back ∙ 8 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 1 day 16 hours back ∙ 45 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 1 day 16 hours back ∙ 2 proposals |
3D Model of the HOTAS Handle
100 USD
A 3D modeler with experience in Rhino or Plasticity is needed to create an ergonomic CAD model of a HOTAS grip (joystick handle). The basis should be the Virpil Constellation Alpha, and its external shape and ergonomics should be reproduced as accurately as possible based on the… 3D Modeling ∙ 2 days 16 hours back ∙ 2 proposals |
Lvov