Budget: 1000 UAH Deadline: 3 days
Добрый день. готов к сотрудничеству. детали проекта оговариваются отдельно, сроки и цена уточняются по проекту.
На данный момент есть пару проектов, которые не успеваю сделать. Нужен конструктор по мебели в помощь. Надо разработать лестницу, пример как это должно выглядеть прикрепил. Жду от Вас стоимость и сроков.
Budget: 1000 UAH Deadline: 3 days
Добрый день. готов к сотрудничеству. детали проекта оговариваются отдельно, сроки и цена уточняются по проекту.
Budget: 2000 UAH Deadline: 3 days
Добрый день!
Готов обговорить детали и приступить к работе.
Работаю в Invention.
Budget: 1000 UAH Deadline: 1 day
Добрый день. Заинтерисовала Ваша задача. Имею опыт в проектирование как мебели так и лестниц. Обращайтесь обсудим задание.
Budget: 1900 UAH Deadline: 3 days
Здравствуйте. Занимаюсь проектированием разной сложности металлоконструкций. Работаю в solidworks. Сделаю 3д модель и чертежи.
Budget: 1500 UAH Deadline: 3 days
Доброго дня. Зацікавила дана пропозиція. Маю досвід роботи із подібними проектами, Працюю інженером – проектантом більше 5 ти років. Звертайтесь, із задоволенням виконаю роботу.
Budget: 2000 UAH Deadline: 3 days
Здравствуйте. Есть большой опыт работы с изделиями из металла (15 лет), в том числе, с элементами Loft-мебели. Примеры работ есть в портфолио. Буду рад сотрудничеству
Budget: 2000 UAH Deadline: 7 days
Добрый день.
Работаю в SOLIDWORKS /Компас.
Буду рад сотрудничеству.
Budget: 1000 UAH Deadline: 1 day
привет, такую лестницу дня за 3 сделаю в таком виде , работаю в sketchup
Budget: 2000 UAH Deadline: 3 days
Добрый день. Работаю в Tekla Structures, AutoCAD, выполню проект, после просмотра ТЗ точно скажу цену и сроки, пока примерно.
Budget: 1000 UAH Deadline: 4 days
Добрый день)
Архитектор 30 Лет стажа
Есть Сертификаты архитектора: объемное проектирование и Градостроительный коммуникация
Готов к сотрудничеству)
Вот пример работ
https://www.youtube.com/watch?v=xYbY_xeu74U
Budget: 2000 UAH Deadline: 3 days
Добрый день!
Готов обговорить детали и приступить к работе.
Работаю в Solidworks
It is necessary to develop drawings for an office project consisting of three rooms and a corridor. The planning of walls and furniture has already been done; the drawings need to be completed. There is a file in ArchiCAD: *Lighting and outlet planning, *Ceiling planning, *Plan scheme for elevations and elevations (3/4 of the walls are glass), *Drawings of built-in furniture. The drawings are to be executed based on the visualization and my task.
Drawings and material list. For a canopy for the installation of solar panels. A canopy for storing equipment and vehicles. Installation site: s. Zhemchuzhnoe, Pavlohrad district, Dnipropetrovsk region, angle of about 10 degrees. Long panels 620 (230 by 113), needed in two rows about 19 meters in length available. So a frame is needed for the installation of the panels only without covering; the joints of the panels will be sealed later with rubber gaskets. It should withstand wind and snow loads. It is not standing in an open field, there are small buildings nearby, but it is outside the city and on a decent slope. A galvanized mounting profile has already been ordered, with a thickness of 1.4 mm, and it needs purlins about 1 m. So, it will probably be necessary to install a profile pipe to reinforce it, to reduce the number of beams, I think, to minimize deflection. It was planned for installation on the roof, but the roof turned out to be not quite convenient for such installation.
A working project for a wooden two-story frame with a total area of 144 sq m is required. The grid is located in a column layout of 6x6 meters. The ceiling height is 7.2 m. The purpose of the frame is for individual storage rooms. The load is 300 kg per m2.
Detailed plan for two plots for construction near the lake in Volyn region, Kovel district, village of Hlukhi. Two modular houses, utilities, solar panels, recreation areas, etc.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.