Project translated automatically. Log in or register, to view the original You need a programming master of Visual Basic (C++) languages to implement the project and subsequent support if necessary for an additional fee.The ones.Create a program that would rewrite the stored video data from Hikvision IP cameras to a remote FTP server with file format storage.SDKs for working with Hikvision cameras in the language C\S++ (Visual Basic) are attached.In the program settings you need to implement the following functions:Add the device with fields to enter the drive camera, IP address, login, password, access port, file download speed, FTP server drive.The ability to set the FTP server settings to download files: the drive server, IP address, login, password, port, download catalog.The ability to set the number of simultaneously processed IP cameras.The ability to set the scan interval of IP cameras in seconds.Times the connection with the IP camera after the download of the files in seconds.The choice of the download method to the FTP server (after the receipt of the camera or at a certain time on the schedule).The maximum time of the connection with the camera in the second.The ability to set the number of simultaneously processed IP cameras.The ability to set the scan interval of IP cameras in seconds.If the basic program fails, the watchdog must start the basic program again.The principle of the program is as follows.The program is launched together with the operating system.After launch, the program begins to check the IP addresses of the devices added in the settings.When the desired IP address is found, the camera connects and begins to rewrite the data, without ceasing to scan the remaining addresses.When the following address is detected, the same happens, that is, the processes of re-writing from different cameras should be carried out parallelly.At the same time, the main window of the program should display the current download course with the indication: the green shot down (downloading direction), the drive of the camera, the IP address of the source, the download rate, the percentage of performance, the total number of files, the calculated time before the completion.If you are currently downloading files to the FTP server, the trace should be displayed.information: the red shell upward (downloading direction), the server drive, the download speed, percentage of performance, the number of files, the calculated time before completion.When you break the connection to the camera, remember the last successfully uploaded file when you restore the connection to start the download from the following file.If the value of the maximum time is exceeded, stop the stick and put the stick into the log and the indicator "unfortunately".When the connection is restored, continue the attachment from the last successful file and when the log is completed, change the indicator to "successfully".Also in the main window should be displayed a work log with the indication of completed downloads: the P/P number, the green shot down (significates the download from the camera), the IP address, the start time of download, the call-in of the uploaded files, the time of download of the files and the indicator successfully failed to download.Also in the log should be displayed information about the file download to the FTP server, namely: P/P number, red shell up (significant to the FTP server download), the server drive, the start time of download, the call-in downloaded files, the time of download of files and the indicator successfully failed to download.The server must create a folder with the current date and inserted files with the IP addresses of the cameras from which the download has occurred.

Proposals 4