Project for the reconstruction of the VC fan
22 USD A project is needed for the reconstruction of the fan VC-2.5 (wheel on the motor shaft) into scheme No. 5 (wheel on the intermediate shaft, belt drive to the motor). It is necessary to consider the load, thermal expansions (smoke extractor), and the compactness of the design. Drawings and photos of the initial fan will be sent after agreement.
The price is approximate. Please make your offers.
Current freelance projects in the category Drawings & Diagrams
Create a layout for a detailed paper architectural model based on the sketch project.I'm looking for a specialist who can prepare a high-quality and very detailed layout for creating a physical model from paper/cardboard. There are source materials for the project: — facades; — sections; — visualizations; — sketch architectural project; — file in .pln format; —… Drawings & Diagrams ∙ 14 hours 3 minutes back ∙ 2 proposals |
Point cloud to Revit (A3852)
For a future architectural project, it is necessary to model a building and the land with roads and stairs from a point cloud. Develop a 2D drawing with the main dimensions, total and living areas of the premises. Output data can be found at the link:… Architectural Design, Drawings & Diagrams ∙ 18 hours 25 minutes back ∙ 3 proposals |
Point cloud to Revit (A3738)
For the future architectural project, it is necessary to model the building and the land with roads and stairs using a cloud of points. The roof of the adjacent building also needs to be modeled. Develop 2D drawings with the main dimensions, total and living areas of the… Architectural Design, Drawings & Diagrams ∙ 18 hours 27 minutes back ∙ 1 proposal |
Lead PCB Designer Needed: 6-Layer HDI/Mixed-Signal Industrial Wearable (Strict IPC Class 3
267 USD
Project Overview: We are finalizing the SHIELD Core V1.2 — a compact (50×40×10 mm) industrial/tactical wearable device. We have a validated engineering architecture, an exploded 3D CAD model, and a finalized component list. We are looking for a senior-level PCB designer who… Engineering, Drawings & Diagrams ∙ 1 day 11 hours back |
KMD drawingWe are replacing welded joints with bolted ones. The dimensions of the products are no more than 13.5 meters. develop detailed KMD drawings; prepare drawings of starting marks; prepare drawings of individual parts; form specifications for metal products, parts, bolts, fasteners;… Drawings & Diagrams ∙ 1 day 14 hours back ∙ 5 proposals |
Ukraine