Pay the printed fee to R-SAD
Lightboards VD4,5,10,11 S1,2 buttons and openings do not move.
In HR1 the extreme right line A, the middle B, the extreme left C. Numeration of contacts from above to below.
The element transformator WT1 can be taken on the preparation.
Blocks A1, A2, A3 go with separate plates. For them, the treble puts an open of 1.1 mm. under the shell. To check files FIL_TR_1,5MGC.RSV, FIL_TR_9MGC_30MGC.RSV and Filter strip.spl7
For the block of the VC in the scheme to make a separate land, and for all the other a second land.
The RSV file should be opened in P-CAD 2006.
Applications 5
-
10 days111 USD
2136 55 0 10 days111 USD
Good day ! I will be able to do this work in Altium with further imports under P-CAD 2006. I have a lot of experience in printing.
Current freelance projects in the category Drawings & Diagrams
Create a layout for a detailed paper architectural model based on the sketch project.I'm looking for a specialist who can prepare a high-quality and very detailed layout for creating a physical model from paper/cardboard. There are source materials for the project: — facades; — sections; — visualizations; — sketch architectural project; — file in .pln format; —… Drawings & Diagrams ∙ 7 hours 25 minutes back ∙ 2 proposals |
Point cloud to Revit (A3852)
For a future architectural project, it is necessary to model a building and the land with roads and stairs from a point cloud. Develop a 2D drawing with the main dimensions, total and living areas of the premises. Output data can be found at the link:… Architectural Design, Drawings & Diagrams ∙ 11 hours 47 minutes back ∙ 3 proposals |
Point cloud to Revit (A3738)
For the future architectural project, it is necessary to model the building and the land with roads and stairs using a cloud of points. The roof of the adjacent building also needs to be modeled. Develop 2D drawings with the main dimensions, total and living areas of the… Architectural Design, Drawings & Diagrams ∙ 11 hours 49 minutes back ∙ 1 proposal |
Lead PCB Designer Needed: 6-Layer HDI/Mixed-Signal Industrial Wearable (Strict IPC Class 3
267 USD
Project Overview: We are finalizing the SHIELD Core V1.2 — a compact (50×40×10 mm) industrial/tactical wearable device. We have a validated engineering architecture, an exploded 3D CAD model, and a finalized component list. We are looking for a senior-level PCB designer who… Engineering, Drawings & Diagrams ∙ 1 day 4 hours back |
KMD drawingWe are replacing welded joints with bolted ones. The dimensions of the products are no more than 13.5 meters. develop detailed KMD drawings; prepare drawings of starting marks; prepare drawings of individual parts; form specifications for metal products, parts, bolts, fasteners;… Drawings & Diagrams ∙ 1 day 7 hours back ∙ 5 proposals |
Borki