Budget: 4000 UAH Deadline: 15 days
Good day John. I have experience in reinforcing old buildings, replacing ceilings with steel beam ceilings with reinforced concrete, load calculations. Visual inspections can also be done remotely.
Announcement for the search of a specialist for the assessment and replacement of ceilings in an old building
We are looking for a qualified specialist to conduct an assessment and provide consulting for the project of replacing wooden ceilings with concrete in a three-story building of an old structure.
Requirements for the candidate:
- Experience in the field of engineering surveys and building reconstruction, preferably with historical or old structures.
- Knowledge of modern construction technologies and materials for replacing wooden ceilings with concrete.
- Ability to conduct detailed engineering assessments of the condition of existing structures.
- Ability to develop design solutions considering safety and preserving the architectural features of the building.
- Experience in preparing cost estimates and evaluating the cost of work.
Responsibilities:
- Conducting visual and instrumental surveys of existing wooden ceilings.
- Assessing risks and developing recommendations for the safe replacement of ceilings.
- Preparing a detailed work plan and cost estimate for the replacement of ceilings.
Budget: 4000 UAH Deadline: 15 days
Good day John. I have experience in reinforcing old buildings, replacing ceilings with steel beam ceilings with reinforced concrete, load calculations. Visual inspections can also be done remotely.
Budget: 27000 UAH Deadline: 30 days
Hello, please attach the initial data to the announcement here or send it in a message. I have experience in the reconstruction of old buildings with wooden inter-floor ceilings. I have experience in designing new construction with various types of inter-floor ceilings - ceilings on wooden beams, prefabricated-monolithic OBT ceilings, as well as Teriva ceilings, prefabricated reinforced concrete with hollow-core and solid slabs, monolithic reinforced concrete. I am an architect by education, with a diploma and certificate, and I have been engaged in design and construction for over 14 years since 2009. I will send architectural projects and structural solutions in a message; some works can also be found on the page https://www.instagram.com/gnuliuh/. The price is conditional, so it will be more accurate after familiarization. It is difficult to assess the work if nothing is known; it is necessary to send - topographic survey at a scale of 1:500, if there are copies from the survey and the general plan of the settlement; preferably geology, if the building is in an existing development and there are other buildings nearby so that the reconstruction does not cause the destruction of the building itself and neighboring houses, otherwise the neighbors will give you goat horns); cadastral number and location of the plot on Google maps, extracts for the plot from the cadastre and registry; extract of ownership of the building, technical passport of the house, measurements, photo and video documentation; reconstruction project if available. If not, then a description of what needs to be changed and what result you are counting on. Send what you have from the listed items; the rest can be completed later. Thank you.
A model of a house needs to be placed on the plot and the real dimensions of the plot should be tied to the plan. The results with AI are not good. An example is in the photo. A rough version is needed, but as close to the original as possible.
I am looking for a designer to develop a partial design project (functional layout of the space, design, visualization, furniture selection) for a children's area with a large sandbox. It is necessary to create a modern, stylish, and functional interior with proper zoning. The project is funded by a grant within a veterans' initiative, so the budget for design is limited. If you are interested in participating, please send your portfolio, estimated cost of work, and timelines for completion.
Need a teacher with experience in online teaching who will demonstrate the use of AutoCAD from scratch to a group of students online. (Preferably - experience in the architectural field) Topics: Introduction to AutoCAD Basic drawing tools Editing drawings Layers and object properties Hatching and formatting Text and tables Dimensions Blocks and attributes External references and drawing organization Preparing drawings for printing Practical work Final project Conditions: 700 UAH/hour. Online, on weekdays, evening time from 18:00
Quantity Surveyor needed for detailed analysis of a construction project We are looking for a specialist to thoroughly analyze the project documentation of a construction site and prepare a detailed list of all materials, volumes, and types of work.Main Task Based on the project documentation, a complete quantity take-off of the project must be performed, and a transparent table of all construction materials and volumes must be prepared. The initial data may include: architectural drawings — AR; structural drawings — KJ / KM; specifications; PDF; DWG; Excel files; if available — BIM/Revit model. We need not just a general construction estimate, but a maximum detailed Quantity Take-Off and Material Breakdown.What needs to be done 1. Complete Quantity Take-Off Calculate the actual volumes according to the project: concrete by grades and structural elements; reinforcement broken down by diameters; metal structures; formwork; blocks and bricks; cement; sand; gravel; plaster; floor screed; waterproofing; roofing materials; facade materials; tiles and stone; ceiling materials; door and window structures; glass; wood; paint; fasteners; consumables; other materials present in the project. The list should be formed as detailed as possible, without combining different materials into general positions. For example: Reinforcement Ø8 — kg Reinforcement Ø10 — kg Reinforcement Ø12 — kg Reinforcement Ø16 — kg Concrete B25 — m³ Concrete B30 — m³ AAC Block 100 mm — m² / pcs. AAC Block 150 mm — m² / pcs. 2. Breakdown by project sections All volumes must be structured at least by the following categories: Foundation; Structural Frame; Slabs; Walls; Roofing; Facade; Flooring; Ceilings; Doors & Windows; Waterproofing; Finishing Works; External Works; other project sections. It is also desirable to separate materials by floors, buildings, villas, blocks, or zones of the site, if the project structure allows. 3. Material Breakdown A separate table of all materials needs to be prepared in the format:SectionMaterialSpecificationUnitQuantity The goal is to obtain a complete list of materials required for the construction of the site, with actual quantities. 4. BOQ — Bill of Quantities A structured BOQ needs to be prepared separately:SectionWork ItemMaterialUnitQuantity If possible, also separate: Materials; Labor; Machinery / Equipment; Transport; Waste Allowance. The main task is to ensure the ability to see the net cost of materials separately from the contractor's work cost. 5. Excel model The final work must be provided in Excel. Desired format:CodeBuildingFloorSectionMaterialSpecificationUnitDesign QuantityWaste %Purchase QuantityUnit PriceTotal Cost Additional Task It would be an advantage if the specialist can create a template system for future projects. Our goal is to use a unified structure Cost Database for analyzing different construction sites in the future. We want to be able to compare: concrete, kg of reinforcement, and materials per 1 m² of construction; cost of structures per 1 m²; materials for one room; materials for one villa; cost of individual construction elements; planned volumes against actual purchases; potential material overruns. Requirements for the Specialist We are looking for a person with practical experience: reading architectural and structural drawings; working with AR, KJ, and KM; Quantity Take-Off; BOQ; construction estimates; analysis of construction volumes; Excel. Important We do not need just a rough estimate of the total project cost. We need a specialist who can break down the project to the level of individual physical materials and quantities. The main result of the work: A complete and verifiable list of all construction materials and volumes of the site that can be used for procurement, tenders, cost control, and checking for overruns. When responding, please indicate: Your experience working with AR, KJ, and KM. Examples of completed BOQs or Quantity Take-Offs. Which programs you work with. Can you work with PDF, DWG, and Revit. How you verify the accuracy of calculations. What format of source files you need. Your cost for the project or cost per m². (Project 1000m²)
Need a specialist for the development of BIM models of metal suspended ceilings We are a manufacturer of metal suspended ceilings: metal Armstrong and rail ceilings. We want to create high-quality BIM models of our products so that architects, interior designers, and planners can easily use our solutions in their projects. We are looking for a specialist with experience in developing BIM models for construction or interior products. What needs to be done: Develop BIM models for our products: Metal cassette ceiling type Armstrong. Metal rail ceiling. Main options for sizes, colors, types of installation, and configurations. If necessary - models of individual elements of the system: panels, rails, profiles, suspension system, corners, connections. Expected formats: Revit / RFA; IFC; if possible - Archicad / GSM; if necessary - 3D formats for the website or catalog. Requirements for models: correct geometry; optimal file weight so that models do not overload projects; ability to change key parameters: sizes, color, type of panel / rail; correct display of materials; clear file structure; usability for architects and designers in real projects; possibility of further placement of models on our website for client downloads. What we will provide: technical specifications of the products; photos and drawings of the products; dimensions of the elements; information about colors, coatings, and execution options; consultations from production. Desired experience of the performer: experience working with BIM models for Revit, Archicad, or IFC; understanding the needs of architects, designers, and planners; experience creating BIM object libraries for building material manufacturers will be an advantage; ability to make models not only visually appealing but also technically correct. Result of work: We want to receive a ready BIM library of our products that can be passed on to designers, architects, and placed on the company's website for download. In your response, please indicate: Your experience in creating BIM models. Examples of similar works. Which programs and formats you work with. Estimated cost of creating models. Estimated completion time.