Budget: 7600 UAH Deadline: 3 days
Good day, I am ready to take on the project, I work in Blender 3D, with over three years of experience.
It is necessary to create 3 visualizations and design of a burial place.
I will send photos of the current grave to the performer.
Approximate dimensions are 2.5 meters in width, 3 meters in length.
The design should be as follows.
Grave in 2 places.
Border around.
The middle is covered with gravel.
Along the border on the sides, a green area of small bushes.
Tombstones - with engraved portraits and inscriptions.
All in sandy, light tones.
The grave should look pleasant and bright.
Be sure to attach examples of work.
Budget: 7600 UAH Deadline: 3 days
Good day, I am ready to take on the project, I work in Blender 3D, with over three years of experience.
Budget: 7600 UAH Deadline: 4 days
Good day! I am an architect and designer, working at an architectural firm.
I will create a bright, pleasant design for you in the best possible way with photorealistic visualizations according to all your requirements.
Portfolio - Freelancehunt
Budget: 7600 UAH Deadline: 4 days
Good day! I am interested in your project and would like to execute it. I work in Blender and have experience. If the offer is still valid, please write to me personally. I would be happy to do this job! Behance
Budget: 7800 UAH Deadline: 3 days
I will do visualizations qualitatively and quickly.
Portfolio: Freelancehunt
Budget: 8000 UAH Deadline: 7 days
Good day! I will perform the work qualitatively and clearly according to the task. Portfolio link: Behance
Budget: 8000 UAH Deadline: 3 days
Hello, I will complete the project.
I will always be in touch for the best result. Behance
Budget: 7800 UAH Deadline: 3 days
Good day, I can implement this project. When do you need the result?
I work with software: Blender, Substance painter.
My works: Behance
Reviews: Freelancehunt
Budget: 8000 UAH Deadline: 5 days
Good day. I can perform modeling and visualization. I can also provide a sample of similar work in personal messages.
Budget: 8000 UAH Deadline: 4 days
Hello. I will do Freelancehunt
Budget: 8000 UAH Deadline: 4 days
Hello, ready to take on your project. Will do everything in the best way and within the specified deadlines.
You can check out my portfolio in the profile.
Feel free to contact me!
Budget: 8000 UAH Deadline: 7 days
Good day. Interested in your project. Ready to cooperate.
Budget: 8000 UAH Deadline: 3 days
I did. I can. I know the technology of the device. I will create drawings if needed.
Budget: 8000 UAH Deadline: 1 day
Hello, I'm Volodymyr! I specialize in 3D visualization and animation in Blender and Unreal Engine 5. I am ready to help you make your projects outstanding! If you are looking for quality work and excellent results, feel free to contact me. Prices for my services are affordable and can be discussed individually, depending on the scope of work and your budget. I also work with various payment methods to provide you with a convenient choice. To familiarize yourself with my work, you can view my portfolio in the profile or at the link: Google Drive Do not hesitate to contact me, and together we will create something outstanding!
Budget: 8000 UAH Deadline: 14 days
Good day Vladimir.
I offer my services to complete your project.
Examples of work in the portfolio, also ready to provide links to similar works with monuments in personal correspondence.
Contact me.
Sincerely,
Sergey.
Budget: 8000 UAH Deadline: 5 days
Good day.
I offer my services in implementing your project!
Budget: 8000 UAH Deadline: 1 day
Good day! Ready to perform visualization. Contact me to discuss the details! My works: Behance
Budget: 8000 UAH Deadline: 3 days
I will create a model and visualization.
Examples of works from the outside. Google Drive
Contact me
Project Description I am looking for a specialist for regular collaboration in preparing 3D models for printing on a 3D printer. Requirements: correction of the model's geometry; removal of artifacts; correction of faces, hands, and small details; closing holes and checking the model for errors; combining all elements into a cohesive model; preparation of an STL file, fully ready for printing. Requirements for the performer: experience working in Blender, ZBrush, or Meshmixer; experience in preparing models specifically for 3D printing; attention to detail; having a portfolio will be an advantage. In your response, please indicate: examples of completed works; cost of preparing one model; estimated completion time. I am considering long-term collaboration. This text looks professional, does not reveal that the models are generated by neural networks, and immediately filters out performers without experience in preparing models specifically for 3D printing.
Looking for a 3D modeler,制作3D模型儿童游乐场用木材,根据图纸,进行调整。
It is necessary to develop an interior design and layout of the retail equipment taking into account customer movement, merchandising rules, convenience for the seller, and placement of all product groups. The store area is 130.7 m². The premises consist of two levels. The floor plan and photographs are attached.
Use the existing model as a basis (I will send it to the performer). Do not change the folding mechanism, hinge, dimensions, or overall structure. The following modifications need to be made:1. Front Supports (horns) Replace the existing short supports with more modern curved horns. The horns should start slightly higher vertically relative to the current model. Keep the overall length of the horns compact (do not make them longer). Only the position relative to the base is changed. This seating should provide more free space under the bottom of the phone for connecting the charging cable without strong bending. All transitions should be smooth, without sharp angles.2. Design Update Give the product a more modern minimalist appearance in the style of Apple (Soft Minimalism). Requirements: increase the radii of rounding throughout the product; remove the feeling of "squareness"; make the transitions between all elements smoother; round the edges and outer edges of the base; maintain a simple minimalist appearance without decorative elements and textures. The product should look like a solid cast premium-level accessory.3. Logo On the inner side of the upper back, create an embossed inscription: Metalandbrassco Requirements: font Franklin Gothic Demi; the inscription should be centered on the back; make it as an indentation (engraved), not raised; depth of indentation — about 0.5–0.8 mm; letters should have sufficient thickness for quality FDM printing.4. Printing Requirements The model should be printed without supports. Do not create new overhanging elements. Maintain the strength of the structure and the existing angle adjustment mechanism. All changes must be adapted for FDM printing (PLA/PETG, 0.4 mm nozzle).What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions must be parametric for further editing. A few days will also be needed for test printing before closing the project.
A new version of the existing corner modular shelf for storage needs to be developed. The provided model can be used as a basis (I will send the model to the performer), but the design and construction should be changed according to the requirements below. General Concept The shelf is intended for installation in the corner of a room and should be modular. Several identical modules are installed on top of each other and securely fixed together. The main style is modern minimalism with smooth lines and large rounding radii. Dimensions Size on each side adjacent to the wall: 230 mm Height of one module: 100 mm The wall thickness should be optimized for FDM printing (approximately 2.5–3 mm).Front Part The front edge should be significantly lower than in the original model. Goal: to ensure free access to the contents; the user should be able to reach items even from the bottom shelf without removing the upper modules. The front cut should be made with a smooth arc. No sharp corners.Side and Back Walls The height of the side and back walls should remain almost full. All outer corners should have large roundings. Module Connection A hidden connection system needs to be implemented. It is currently visible. On top of each module: guides/mounting holes. On the bottom: matching pins. After installation, the module should: automatically center; not shift sideways; not rotate. The connection should be as inconspicuous as possible from the outside.Internal Part The bottom should remain flat. No partitions should be made inside for now (there is a visualization of the concept attached). (Partitions will be a separate task later.) Construction The model must be fully suitable for FDM printing. Mandatory: no supports; no overhanging elements; no complex bridges; no separate parts. The shelf should be printed as a single piece.Design No decorative textures should be used. Surfaces should be smooth. Large smooth radii are welcome. The shape should look modern and premium.What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions should be parametric for further editing.