It is necessary to create a B2B online store from scratch, which will represent the following stack: WordPress + WooCommerce + B2B portal (B2BKing Pro) + integration with KeyCRM + integration with accounting (BookKeeper). The project is urgent, so a phased approach is possible: creating a working and already functioning, as well as SEO-optimized online store in the shortest possible time, and the integration with the B2B portal, CRM, and accounting will be the second stage.

I am creating a website on the Khoroshop platform. There is a request to make the color scheme more attractive and create new banners. I am looking for a designer to whom I can delegate the visual component of creating the online store. Experience working with Khoroshop will be a plus.

TECHNICAL SPECIFICATION FOR WEBSITE DEVELOPMENT Project for the Promotion of Professional TEV Electric Commercial Vehicles in Poland 1. PROJECT OBJECTIVE A two-level online system should be developed, consisting of: 1. A short, single-page landing page designed for advertising, initial product presentation, demand research and lead collection. 2. A comprehensive technical and information website containing detailed descriptions of the models, body configurations, technical specifications, documents, application areas and customisation possibilities. The landing page should explain the product benefits quickly and lead visitors towards completing the enquiry questionnaire. The main website should answer detailed technical, commercial, homologation and organisational questions from prospective customers. PART I. SINGLE-PAGE LANDING PAGE 2. MAIN PURPOSE OF THE LANDING PAGE The landing page should not function as a large catalogue and should not overwhelm visitors with excessive technical details. Its purpose is to: – explain what TEV is within 30–60 seconds; – show its main fields of application; – demonstrate the range of available body configurations; – attract potential customers; – collect information about genuine market demand; – direct interested users to the main technical website. In terms of length and structure, the landing page should be comparable to the Italian partner’s website: one coherent page without an excessive number of menus, sections or transitions. 3. CORE CONCEPT AND POSITIONING TEV should not be presented as a small Chinese electric vehicle. It should be positioned as: “A professional electric platform for cities, businesses and specialised services.” Primary message: “One Electric Platform. Multiple Professional Solutions.” Supporting message: “Compact electric commercial transport for logistics, municipal services, technical operations, food delivery and specialised body applications.” The central idea of the website should be: “The customer is not simply choosing a vehicle. The customer is choosing a professional solution designed for a specific task.” 4. LANDING PAGE TARGET AUDIENCE The landing page should address the following customer groups in an equally credible and attractive way: – municipal and public utility companies; – city, municipality and district authorities; – logistics and courier companies; – airports, ports and terminals; – warehouses and industrial facilities; – food-industry companies; – HoReCa, catering, confectionery and ice-cream businesses; – agricultural companies; – technical and service companies; – manufacturers of specialised vehicle bodies and equipment; – specialist vehicle dealers; – companies interested in creating their own range of specialised electric vehicles. 5. SINGLE-PAGE WEBSITE STRUCTURE SECTION 1. HERO SCREEN Purpose: Immediately communicate the professional nature of the product and encourage the visitor to continue exploring. Visual content: A full-screen video or a dynamic sequence of three or four scenes: – a TEV logistics vehicle operating in an urban environment; – a roll-up door vehicle during loading or unloading; – a refrigerated version; – a flatbed or specialised municipal configuration. The first screen should not be limited to a static photograph of a vehicle standing in an empty parking area. Headline: “One Electric Platform. Multiple Professional Solutions.” Subheadline: “Compact electric commercial transport for urban logistics, municipal services, businesses and specialised applications.” Buttons: – “Select Your Configuration” – “Tell Us About Your Task” Both buttons should direct users to the questionnaire at the bottom of the page. Additional text link: – “View Detailed Technical Information” This link should direct visitors to the main technical website. SECTION 2. WHAT IS TEV? This should be a short section of no more than four or five sentences. Suggested content: “TEV is a compact L7e-CU electric commercial platform designed for professional work in cities, business facilities and restricted-access areas. Different cargo bodies and specialised equipment can be installed on the same base platform. The vehicle combines compact dimensions, an enclosed cabin, electric drive and the ability to adapt to the requirements of different industries.” Four concise benefits should be displayed next to the text: – compact dimensions; – electric drive; – multiple body configurations; – European type-approval basis. Large technical tables should not appear in this section. SECTION 3. MAIN APPLICATION AREAS This section should contain no more than six visually strong cards. Card 1. Urban Logistics – last-mile delivery; – e-commerce; – courier and postal services; – supply of retail locations. Card 2. Municipal and Public Services – street and public-space maintenance; – parks and green areas; – urban infrastructure; – municipal and maintenance teams. Card 3. Refrigerated and Food Delivery – chilled and frozen products; – catering; – confectionery; – ice cream; – HoReCa. Card 4. Warehouses, Airports and Terminals – internal logistics; – technical maintenance; – transport of tools and equipment; – operation in restricted-access areas. Card 5. Agriculture – farms; – greenhouses; – plant nurseries; – orchards; – local transport of produce and materials. Card 6. Technical and Commercial Services – facility management; – installation companies; – mobile service teams; – construction and maintenance companies. Each card should use a strong image, a concise title and a one-sentence description. SECTION 4. MAIN BODY CONFIGURATIONS Four or five principal configurations should be presented. Roll-up Door Logistics Box For frequent stops, urban delivery and quick access to cargo. Enclosed Cargo Box For secure transportation of goods, tools and equipment. Refrigerated Cargo Box For chilled, frozen and temperature-sensitive products. Flatbed or Open Cargo Body For municipal, construction, agricultural and service applications. Custom Body For specialised projects and non-standard equipment. The cards should show not only the vehicle itself, but also the real-life application of each configuration. Button below the section: “View All Configurations” The button should lead to the main website. SECTION 5. CUSTOM — BUILD A VEHICLE FOR YOUR TASK This is one of the central sections of the project. Headline: “Your Idea. Our Electric Platform.” Main text: “We can supply a basic TEV electric chassis or platform for the installation of specialised equipment by Polish or European manufacturers. Customers may use their own body solution or provide us with a technical specification so that the manufacturer can assess the possibility of producing a customised solution in China.” Possible adaptation directions: – mini crane; – aerial work platform; – mobile service workshop; – refrigerated or insulated box; – vacuum or cleaning equipment; – watering system; – tipper body; – mobile advertising platform; – mobile retail point; – specialist body for energy or municipal services. The website must not imply that all of these solutions are already available as standard production models. The following clarification should be included: “The examples above demonstrate possible directions for platform adaptation. Each configuration requires an individual technical, legal and homologation assessment.” Separate message for body and equipment manufacturers: “Do you manufacture vehicle bodies, lifting systems, refrigeration units or municipal equipment? Use the TEV platform as the foundation for your own range of specialised electric vehicles.” Button: “Discuss a Custom Project” SECTION 6. BENEFITS AND KEY FIGURES Unverified savings calculations must not be published at this stage. The section should include only confirmed technical and operational information, such as: – enclosed two-seat cabin; – different battery options; – speed depending on vehicle version; – compact vehicle width; – electric drive; – several body configurations; – European L7e-CU category. Detailed financial calculations should be added only after a Polish operating-cost model has been developed, including energy, maintenance, financing and vehicle-use assumptions. For the initial version, the following statements may be used: – lower energy costs compared with an internal-combustion vehicle; – fewer regular service operations; – zero local exhaust emissions; – low noise levels; – easier manoeuvring and parking; – convenient operation in cities and restricted-access areas. Required disclaimer: “Actual performance and savings depend on the vehicle configuration, load, route and operating conditions.” SECTION 7. MARKET-DEMAND QUESTIONNAIRE This is the main conversion element of the landing page. Headline: “What Kind of Electric Vehicle Does Your Organisation Need?” Subheadline: “Answer a few questions. We will analyse your requirements and propose an appropriate configuration.” Required fields: – full name; – company or organisation; – position; – email; – telephone number; – region or city; – industry; – intended vehicle application; – type of cargo; – approximate cargo weight; – whether temperature control is required; – expected daily mileage; – use on public roads or restricted-access premises; – preferred body type; – expected number of vehicles; – expected purchase date; – preferred acquisition method: • purchase; • leasing; • rental; • currently researching the market; – interest in a test drive; – open field for describing the requirement. Additional question for body manufacturers: “Does your company manufacture vehicle bodies or specialist equipment?” If the answer is “yes”, additional fields should appear: – type of body or equipment; – required chassis parameters; – interest in cooperation or in developing a proprietary vehicle range. Button: “Request an Initial Consultation” Message after submission: “Thank you. We will contact you after analysing your enquiry.” Functional requirements: – all data should automatically enter a CRM system or central database; – mandatory consent to personal-data processing under GDPR; – spam protection; – ability to export leads to Excel; – source tracking for each enquiry; – integration with Google Analytics and advertising platforms; – automatic notification to ORSA GROUP whenever a new enquiry is submitted. SECTION 8. LINK TO THE MAIN WEBSITE Short message: “Do you need detailed technical specifications, dimensions, documents or configuration information?” Button: “Open the Technical Catalogue” SECTION 9. CONTACT AND LEGAL INFORMATION The following should be included: – ORSA GROUP Sp. z o.o.; – telephone number; – email address; – contact form; – privacy policy; – cookies information; – statement that the project is currently preparing the introduction of the products to the Polish market. The wording “official exclusive distributor” must not be used until the relevant agreement has been signed. PART II. MAIN TECHNICAL WEBSITE 6. PURPOSE OF THE MAIN WEBSITE The main website should function as a complete technical, commercial and industry-information database. It is intended for: – customers seriously considering a purchase; – procurement departments; – technical directors; – public and municipal organisations; – dealers; – service partners; – specialist body manufacturers; – potential investors; – leasing and finance companies. 7. MAIN WEBSITE STRUCTURE 7.1. HOME PAGE The home page should include: – concise brand and product positioning; – main vehicle models; – application sectors; – primary benefits; – link to the configuration selector; – test-drive interest form; – access to technical documentation. 7.2. TEV MODEL PAGE A dedicated, detailed TEV model page should be developed. It should include all confirmed data: – vehicle category; – drive type; – motor power; – battery options; – range; – maximum speed; – length; – width; – height; – wheelbase; – kerb weight; – maximum authorised mass; – payload; – cargo-platform dimensions; – seating capacity; – charging time; – braking system; – steering system; – cabin equipment; – warranty; – available options. For parameters that depend on the configuration, the following note should be displayed: “This parameter depends on the vehicle version, battery and installed body.” All numerical data must be verified against official manufacturer documents, CoC, WVTA and technical specifications. 7.3. BODY CONFIGURATIONS Separate pages should be created for: – Flatbed; – Cargo Bed; – Standard Logistics Box; – Aluminium Cargo Box; – Roll-up Door Logistics Box; – Refrigerated Cargo Box; – Insulated Cargo Box; – High Railing; – Dump Body; – Custom Body. Each page should include: – photographs; – intended application; – external dimensions; – internal dimensions; – volume; – body weight; – final vehicle payload; – door type; – materials; – temperature range; – available optional equipment; – standard or custom-production status; – homologation status; – European availability; – estimated production time; – quotation-request form. 7.4. INDUSTRIES AND APPLICATIONS A separate page should be created for each market: – municipal services; – parks and green areas; – urban delivery; – refrigerated logistics; – HoReCa; – food manufacturing; – airports; – ports; – warehouses and logistics centres; – industrial companies; – agriculture; – facility management; – service companies; – hotels and tourism facilities. Each page should answer: 1. What operational problem exists in the sector? 2. Why may a conventional vehicle be too large, expensive or impractical? 3. Which TEV configuration is most suitable? 4. How could the vehicle be used in everyday operations? 5. What information is required to prepare a quotation? 7.5. CUSTOM SOLUTIONS A comprehensive technical and commercial section should be developed. Option 1. Complete Vehicle Supply Standard bodies and finished configurations. Option 2. Chassis or Platform Supply For Polish and European body manufacturers. Option 3. Custom Development Submission of the technical specification to the manufacturer for an assessment of production in China. Option 4. Joint Product Development Development of a proprietary specialised vehicle range together with a body or equipment manufacturer. The Custom Project questionnaire should include: – vehicle purpose; – equipment weight; – dimensions; – power demand; – mounting method; – required payload; – expected number of vehicles; – homologation or certification requirements; – drawings and documents; – intended sales market. The form should allow file uploads. 7.6. HOMOLOGATION, CERTIFICATION AND REGISTRATION The section should include: – EU Whole Vehicle Type Approval; – European type-approval number; – L7e-CU category; – Certificate o

There is a template in Figma, and there are images drawn in Ukrainian. They need to be translated and imported into different languages. About 100 pieces An example of an image, and there are quite a few like this. Please provide the budget for each image or some volume.

Hello, I would like to request a quote for the creation of a website dedicated to the ongoing project. The site should include the following sections or tabs: About the project Consortium / implementers – leader and partners Tasks of individual entities Project library Blog / project timeline Contact All materials, photos, and descriptions will be provided in an edited form, ready to be placed on the site. I care about secure and stable hosting. The technology used to create the site, e.g., WordPress, Canva, or other solutions, is not of great importance to me as long as it provides appropriate functionality, security, and the ability for easy content updates. The timeline for completion is also important — the sooner, the better. I would like the work on the final finishing of the site to be completed by the beginning of August at the latest. Please provide information regarding the estimated cost, possible completion date, and the scope of services included in the quote. Thank you in advance for your response, BL