It is necessary to design a board (Gerber) and write software.
esp32 mini as the controller, PIR sensor, 18650 power supply, charging board, external siren, external output via MOSFET, capacitors.
Control of timed shutdown via phone (Bluetooth or Wi-Fi). 3 operating modes.
In the photo, an example of the finished product (board).
Applications 6
-
3 days92 USD
89 3 days92 USDGood afternoon!
I am ready to write firmware for ESP32 mini for your circuit.
The task is clear:
— PIR motion sensor,
— Control of siren and external output via MOSFET,
— Power from 18650, charging via TP4056 board (presumably),
— Control via Bluetooth or Wi-Fi (optional),
— 3 operating modes + the ability to temporarily disable from a phone.
… ✔️ I will implement:
— Logic of three modes (for example: security / test / off),
— Control via BLE (through ESP32), or via web interface over Wi-Fi,
— Power monitoring and battery protection (if needed),
— Stable operation with minimal power consumption.
-
2 days91 USD
11 2 days91 USDHi there, i worked a bunch of time with arduino/esp systems, i can try to do that, but i never worked with this type of projects, if we can talk about some details, i can try to take this project and make it in time.
-
2 days96 USD
16 2 days96 USDHello, I can help you with the project but I need to clarify the details. If you agree, we can discuss the specifics. I would be glad to cooperate, and I also wanted to clarify whether you only need the software and schematic or also a finished physical device?
Current freelance projects in the category C & C++
Comparative analysis of the effectiveness of custom software (v2.2-field) and reference software (Meshtastic v2.x)
22 USD
Comparative analysis of the effectiveness of custom software (v2.2-field) and reference software (Meshtastic v2.x) on the identical hardware platform (ESP32 + SX1268, 2W) based on the criteria of range, throughput, link stability, and power consumption. Conduct tests with… C & C++, C# ∙ 1 day 11 hours back ∙ 2 proposals |
Consultation and audit of the current project on Odoo 19 Community Edition
We are looking for an Odoo Developer — a solo developer with experience in Odoo 19 Community Edition, including using Claude Code. We need a specialist who has successfully implemented projects in Odoo and practical experience in development using Claude Code. Important: we only… C & C++, Javascript and Typescript ∙ 4 days 12 hours back ∙ 7 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 5 days 13 hours back ∙ 4 proposals |
Black Ukraine (RP-project on base MTA)
1154 USD
|
Residential Proxy Infrastructure EngineerWe're building a residential proxy network from scratch — fully owned, no third-party suppliers. We need one exceptional network engineer to build the entire technical foundation. What you'll build: - Android background SDK that routes proxy traffic through user devices… C & C++, DevOps ∙ 11 days 9 hours back ∙ 15 proposals |
Lithuania