Консультация по Raspberry
У нас Raspberry Pi 4 Model B 2GB не может подключиться к модемам.
У нас есть свой PCI Hub в который мы подключаем 3шт PCI модемы.
В микротике все модемы видяться, а в Raspberry на системе MPTCPRouter - нет.
Нужно заставить расбери увидить все 3 модема, включенные в хаб. Нужна консультация и выполнение задачи
-
Рекомендую изменить категорию на "Встраиваемые системы и микроконтроллеры"
-
ну во первых, убедитесь, что хаб на месте. Делается это командой lsusb
Потом необходимо убедится, что pci на месте. Делается это через lspci.
Дальше посмотреть по dmesg -у, того что происходит. Скорее всего, в ядре просто не хватает модуля.
Попробуйте гуглонуть 'debian firmware'
Но, всегда есть но, ep06 могут работать через юсб который также выводится на разъем m2 / pci
-
Current freelance projects in the category Embedded Systems & Microcontrollers
STM32H743 + Ethernet (OpenH743I-C DevBoard)For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 4 days 18 hours back ∙ 5 proposals |
Development of a GPS-GSM tracker
111 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 6 days back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 6 days 1 hour back ∙ 2 proposals |
Tuya smart projectFor a Wi-Fi device. Looking for a specialist with Tuya IoT Platform / Tuya Panel Studio experience, working with CBU is a must! Tasks to be completed: Account registration 1. Product configuration in Tuya IoT Platform 2. Configuration of Data Points (DP) 3. Interface development… Embedded Systems & Microcontrollers, Hybrid Mobile Apps ∙ 6 days 20 hours back ∙ 4 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 8 days 7 hours back ∙ 4 proposals |