Scheme/Chart of Bluetooth devices
462 USD -
30 days1154 USD
4479 71 0 2 30 days1154 USDI conduct the development of a 3D model in SolidWorks with the possibility of review in the eDrawings level of the sketch project (Preliminary design) - a model that contains the principles of constructive solutions and gives a general idea of the structure and principle of action of the product, as well as the data that determine its conformity to the design.
After the discussion and agreement of the design - the design of the cracks under the necessary manufacturing technology.
Final deadlines and cost - after discussing the details of the project.
-
14 days577 USD
6755 77 0 1 14 days577 USDHello to you. Ready to fulfill your task. Write to discuss all details.
Current freelance projects in the category Embedded Systems & Microcontrollers
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 5 days 11 hours back ∙ 5 proposals |
Development of a GPS-GSM tracker
111 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 6 days 17 hours back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 6 days 17 hours back ∙ 2 proposals |
Tuya smart projectFor a Wi-Fi device. Looking for a specialist with Tuya IoT Platform / Tuya Panel Studio experience, working with CBU is a must! Tasks to be completed: Account registration 1. Product configuration in Tuya IoT Platform 2. Configuration of Data Points (DP) 3. Interface development… Embedded Systems & Microcontrollers, Hybrid Mobile Apps ∙ 7 days 13 hours back ∙ 4 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 9 days back ∙ 4 proposals |
Heraklion