Measurement
338 USD Construction of a 17000 m2 rear plate (confirmed by the project) with a cover of the PAG-14 plate to overload the grain.Orientation design of the cargo field cover:
Flat coverage type PAG-14 (airport);
sand of large grains;
The Busted Bust;
The ground ground ground ground;
Geotextile materials according to the need (accurate by the project)
The load on the field cover is 30 tons/m2.To carry out, if necessary, the protection or transfer of engineering communications that enter the work area.Filed self-splitting canalization orientative length 900m.p.Make the subduct to the D150mm home water pipeline with the installation of the calculator.To carry out the transfer and additional installation of firewall hydrants D100mm.Electrical lighting in accordance with the requirements of current norms.Execute the heat network outside the field.The heat grid on the railways and outputs to be placed on the stack.All project decisions must be clarified during the project development.In the listed short-term calculation include the following expenses:
- costs for the payment of services related to the preparation for the performance of the works, their implementation and the introduction of the objects to the operation;
The costs for the disposal of waste (if necessary);
- the funds for drawing into the nature of eight project buildings, networks and reppers before the start of construction;
Costs for covering the risks of the building participants;
the cost of the project-cost documentation;
Author supervision;
and technical supervision.
Current freelance projects in the category Engineering
Reprogramming of an automatic industrial press
113 USD
Describing the operating principle in effect, as well as the changes that need to be made Please suggest prices Operating principle of the equipmentThe equipment consists of three main units that operate synchronously:stepper motor feeder (feeder);die for punching… Embedded Systems & Microcontrollers, Engineering ∙ 3 days 2 hours back ∙ 4 proposals |
To design a hangar with a height of 8 m for the large hall.
564 USD
The hangar is planned to be completely made of sandwich panels. Inside, a crane with a lifting capacity of 5 tons will be installed. Sandwich PIR 80 wall panel 1150mm Sandwich PIR 80 roof panel 1000mm It is also necessary to design for the crane tracks Engineering, Architectural Design ∙ 3 days 2 hours back ∙ 3 proposals |
Development of project documentation for KM and KMD for a metal warehouse 15×48 mIt is necessary to develop project documentation for the stages of KM (Metal Structures) and KMD (Detailed Metal Structures) for a single-story warehouse building.Input Data Purpose: warehouse space. Building dimensions: 15 × 48 m. Area: 720 m². Wall height: 6.0 m. Height to the… Engineering, Drawings & Diagrams ∙ 4 days 22 hours back ∙ 6 proposals |
Preparation of documentation for certificationWe manufacture containers from black metal and stainless steel. Currently, to pass the certification of these products, we need to prepare some documents, namely: - Select the DSTU standard for welding, and find where to purchase this standard so that it is suitable for us.… Engineering, Drawings & Diagrams ∙ 6 days back ∙ 3 proposals |
Development of drawings and patterns for a collapsible frame-tent measuring 3x4m (for production in Germany)It is necessary to develop a complete set of design documentation (DD) for the production of a collapsible tent measuring 3x4 meters. The product will be manufactured at a factory in Germany (Becher Planen), so it is critically important to strictly adhere to European… Engineering, Drawings & Diagrams ∙ 7 days 15 hours back ∙ 1 proposal |
Odessa