Electrical fixation for helmet + control program
- processing the electronics (including the selection of the nomenclature of the elements)
- Implement the logic of work and interaction of electricity, programming Arduino
Make a work sample.
- by separate agreement in the future - to dissolve another 25 sets.Short description of use:
A helmet of virtual reality.
- after use the helmet must be placed by the user or operator on the subset
- there is a model of folders for 3D printing, with the possibility of upgrading
The controller attachments are separate from the helmet attachment and separate from the helmet attachment.The main mass of electronics is supposed to be installed in the helmet attachment.
- Non-mass production (the expected call-to ~25 pieces in 2-3 months)
Description of the supposed elements:
- Sensor "Is the helmet installed on the subset"
- the sensor "whether the helmet is properly installed on the fixation" (it can be placed correctly - with lenses up, or wrongly - with lenses down).- sensors "whether the controller is set" on the subset (left and right controller).The ventilator (80 * 80 * 20mm)
- temperature sensor and thermal resistant for temporary heating of the helmet at low temperature (for example, 5 minutes at a temperature of 20 degrees, then 30 minutes off).It is necessary to reduce helmet saturation if in the room a cool and heated user wears a helmet.Similar situation occurs when wearing glasses on the street in winter.- LEDs to indicate that everything is ok or something is wrong
- the button "operator confirmed that everything is fine" (if the customer hanged the helmet himself - then it's good, but the operator must check that everything is fine, throw the lenses, etc.and d)Arduino for Logic and Software Management
- it is necessary in the elements to put the possibility of further development of connection with the computer - to transmit information from the fixation to the PC, whether the helmet and controller is installed on the fixation.The supposed way of communication is WiFi.
Applications 2
-
deleted by moderator -
deleted by moderator -
deleted by moderator
-
deleted by moderator
-
deleted by moderator
-
deleted by moderator
-
Current freelance projects in the category Embedded Systems & Microcontrollers
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 4 days 18 hours back ∙ 5 proposals |
Development of a GPS-GSM tracker
111 USD
Hello! A GPS-GSM tracker needs to be developed. The device should be small in size. The operating range is 6-32V. It should have a built-in battery that allows it to operate for 3-4 hours without external power. The main task is location tracking. The device should have: - a… Embedded Systems & Microcontrollers, Engineering ∙ 6 days back ∙ 2 proposals |
Need to exit Android watch from cyclical fastboot.The Mobvoi Ticwatch 3 pro GPS watch entered a cyclic fastboot mode during a firmware flashing attempt. I am looking for someone who can fix it and determine if it is possible to install the firmware. Embedded Systems & Microcontrollers ∙ 6 days 1 hour back ∙ 2 proposals |
Tuya smart projectFor a Wi-Fi device. Looking for a specialist with Tuya IoT Platform / Tuya Panel Studio experience, working with CBU is a must! Tasks to be completed: Account registration 1. Product configuration in Tuya IoT Platform 2. Configuration of Data Points (DP) 3. Interface development… Embedded Systems & Microcontrollers, Hybrid Mobile Apps ∙ 6 days 20 hours back ∙ 4 proposals |
Software development for Arduino (RF modules 3–7.5 GHz, automatic frequency scanning)It is necessary to develop a system on Arduino for the automatic search of active analog video signals and the automatic tuning of the transmitter to the detected frequency.It is planned to use three separate transceiver modules: 3000–4200 MHz; 4900–6000 MHz; 6100–7500… C & C++, Embedded Systems & Microcontrollers ∙ 8 days 7 hours back ∙ 4 proposals |
Kyiv