3D Mesh imprint in the form.
45 USD You need to take a scanned 3D model in mesh format, place it inside a rectangular block, perform a Boolean Difference (subtracting the model from the block) to create an accurate negative (impression), after which strictly vertically split this block in half (these will be two halves of the mold), and additionally provide four through holes for fastening/tightening, so that the final structure can be used as a mold for clamping the part in presses (I will provide the hole layout); the result must have correct geometry, without artifacts, at a scale of 1:1 and suitable for 3D printing (STL) and preferably also in a format for Fusion 360.
Client's review of cooperation with Oleg Boguslavsky
3D Mesh imprint in the form.Quick, easy communication. Experience and professionalism are felt. I can recommend.
Freelancer's review of cooperation with Yurii Yurii
3D Mesh imprint in the form.A well-defined task is already half the job. Thank you for your trust, Yuriy. My best regards as a client.
-
1 day16 USD
114 1 day16 USD
Good day!
I can complete your task of creating a two-component mold based on a 3D scan.
What I will do:
• I will check and prepare the mesh (remove possible artifacts, holes, geometry issues)
• I will create a block with the necessary clearances
• I will perform a Boolean Difference to obtain an accurate negative of the model
• I will split the mold into two halves vertically
• I will add through holes for fasteners according to your markings
• I will consider tolerances so that the part fits correctly into the mold
…
Result:
• STL files (2 halves, ready for 3D printing)
• file for Fusion 360 (for further editing if needed)
I work with functional models, so I pay attention not only to geometry but also to practical use (clamping in vises, fit accuracy, structural reliability).
I can start immediately after agreeing on the details.
-
3 days16 USD
250 3 days16 USD
My greetings! From the description, the task is clear, I have experience in building models in Blender for printing in STL format using various modifiers, including Boolean. I pay considerable attention to ensuring that the models geometrically match the references/technical drawings and have a quality mesh. I would like to see the 3D model that needs to be worked on, as this affects the cost and deadlines. If you are interested, I invite you to discuss the project.
-
5 days67 USD
647 8 0 1 5 days67 USD
Good day.
I understand this is for filling.
The task is clear, we just need to look at the scan
and what you want to achieve.
I hope this is not a startup and you clearly understand what you are asking for.
-
1 day16 USD
592 7 0 1 day16 USD
Good morning, I can do it in F360, based on the task to output two parts of the STL matrix for printing or milling.
-
2 days45 USD
1064 17 0 2 days45 USD
Hello!
It is better to do this in specialized software.
For example, the combination of GeoMagic Design X + CAD SolidWorks. The output is STEP for milling and for 3D printing STL.
Contact me – I will do it!
-
2 days45 USD
1099 5 0 2 days45 USD
Hello!
I will complete your order.
I work in quicksurface. It is perfect for solving mesh problems, for print files: STL, PLA.
Please provide the file in a private message, let's see what can be done.
And for now, the price is this!
It may change after a thorough review.
-
1 day16 USD
5907 345 0 1 day16 USD
I will consider the model, and then we will see. Usually, I do STEP+STL in SolidWorks.
-
1 day16 USD
655 5 1 1 day16 USD
Good day.
I can easily help you with this task.
I have a lot of experience in 3D graphics. I will do it easily.
Portfolio:
Freelancehunt
-
1 day22 USD
2907 53 0 1 day22 USD
Hello.
The task is clear.
I work in Blender.
Portfolio here
Behance
-
1 day22 USD
3463 46 2 1 day22 USD
I will perform in the software complex Autodesk INVENTOR. I will save in the required format.
-
Вітаю.Можна подивитись на скан?
Він може потребувати доопрацювання перед тим як створити точну форму.
-
Юрій, Ви перевіряли скан моделі?
Він має артефакти чи якісь інші помилки?
Чи не приийдеться виправляти скановану модель?
Від цього залежатиме вартість та термін виконання! -
Current freelance projects in the category 3D Modeling
Creation of backpacks based on ready-made STLIt is necessary to create 15 unique variants of backpacks for Deathwing Knights (Dark Angels, Warhammer 40,000) based on the provided STL models. I will provide: 2 STL files of the basic Deathwing Knight backpacks; images with examples of desired design variants. The images with… 3D Modeling ∙ 11 hours 29 minutes back ∙ 7 proposals |
Refinement of the 3D model of the "Pineapple" lamp
45 USD
Source Data There is a ready STL model of a pineapple lamp with geometric relief and a removable top. I will send it to the performer. Attached are screenshots of the source and the desired relief. All main dimensions, seating places, threads, fastenings, wall thicknesses, and… 3D Modeling ∙ 21 hours 10 minutes back ∙ 7 proposals |
Development of marker-based AR with a 3D model
We are looking for a specialist in 3D modeling and AR to implement an interactive project. It is necessary to create a 3D model of an object and set it up for display in augmented reality (AR) when the smartphone camera is pointed at a printed banner. As a result, the user… 3D Modeling, VR & AR Design ∙ 1 day back ∙ 2 proposals |
Industrial design of a premium 15.6-inch desktop terminal with AI ("Cube") We need an experiencedIndustrial design of a premium terminal with artificial intelligence ("Cube") — Stage 1: Aesthetics and Ergonomics Project Overview We are developing a premium, futuristic desktop terminal with an AI assistant called "Cube." The device is designed for seamless voice and visual… 3D Modeling, Engineering ∙ 2 days 5 hours back ∙ 7 proposals |
Creation of a BIM model in REVITCreation of a BIM model in REVIT with specified technical characteristics of the product, including appearance and dimensions of the product. 3D Modeling ∙ 2 days 22 hours back ∙ 2 proposals |
Kyiv